Your cart is empty.
Your cart is empty.Maximize the signal range and reliability of a wireless home network by housing its structured wiring components in Leviton's line for Wireless Structured Media Centers, offered in (14" x 13. 7"), (28" x 13. 7"), and (42" x 13. 7") sizes. Unlike standard metal enclosures that inhibit signal range, this ABS polymer enclosure offers "RF transparency" to minimize interference. The enclosure (49605-140) is 14 inches in height and includes a vented cover that facilitates cooling of enclosed equipment. The vented cover installs with provided screws. With seven 1-inch knockout, and three 2-inch knockouts, the enclosure makes installation, maintenance, and expansion quick and easy. FEATURES: Flame-retardant ABS polymer minimizes interference. vented cover assists in airflow for cooling active gear. Compatible with all Leviton Structured Media components. CONTENTS: Wireless (RF Transparent) Structured Media Center Enclosure, Vented Cover. NOTE: Required screws not included.
wbish
2025-08-28 18:11:25
Overall, I'm pretty happy with how this turned out.Pros:- Most of what I would want to put in the unit fits. I had thought about putting an NVR in here, but probably a bad idea with the heat and wont fit anyways.- If you have standard wall framing (16 inch on center studs) this will be a straightforward install.- No perceptible impact to WIFI signal with this enclosure.- Venting of the enclosure is really good. No heat issues.- Wide variety of official Leviton accessories available, but beware, they can be very expensive.Cons:- One of the three door hinges seems to get caught on something and snaps closed sometimes. I can't really figure out why -- as far as I can tell the install is level and plumb. Perhaps would help if the enclosure were a little sturdier.- Overall its not that rigid or sturdy, but nothing has broken yet. I wish it had perhaps 30% more toughness to it.- I think its a little too expensive for what it is.- The spacing of the holes is very much proprietary so just be aware nothing will align up perfectly unless its a Leviton accessory specifically designed for their own enclosures.
Sal
2025-07-26 12:27:02
The box looks great and like new, works for our project, highly recommended.
P. J.
2025-07-19 12:06:04
Well made, entire product made from plastic. The knockout holes are fairly thick and need some type of tooling to punch through and to deburr.The door can be mounted to open either from the left or from the right. Just note that there are no shelves that are provided with this packaging and you’ll have to get some other type of shelving available either from this company or use zip ties to attach it to the holes in the back of the casing.Includes a cardboard shield to help with painting is very nice. Would buy again.
Webb Pickersgill
2025-07-06 14:25:03
I bought a home and I was looking to retrofit various smart home features including ethernet, cable, and some other things. So, I was looking for a neat way of mounting and organizing the wires and equipment.Of course the Leviton "system" shows up filling this need for most consumers. I wasn't sure about it, but I purchased it anyway to give it a shot. I also purchased a bunch of various add-on pieces for it, for power, managing cables, and mounting equipment.I must say, the case is well engineered and manufactured. Designed to fit between standard trusses, and in most homes it would look aesthetically pleasing enough to pass the "wife test." But when I rough-test-fitted my equipment in there, I wasn't able to really get it all in there comfortably.Ultimately I did return this product, and I decided to go the DIY route and mount my wiring and equipment to a large piece of Melamine, which allowed me to lay out and organize my wiring and equipment exactly how I wanted, without the limitation of working between the trusses.In short: Good product, expensive proprietary add-ons. Not sure if it would really be worth the money, but it IS a high quality product for what it is.
gwest
2025-07-01 14:38:38
Worked perfectly with my Samsung Frame, to hide the box behind the tv.
Surgeon Rick
2025-06-02 10:07:21
More than satisfied, really out did myself thanks to Leviton's product. I have my router, modem, firewall, SIEM, IOT hub, and UPS all inside this one cabinet.You'll want to use the screws that come with your hardware (computer, router, etc..) to mount your items to the interior of the cabinet, there are push-pin pegs that leviton sells but they cannot hold most of the heavier objects. For really heavy objects you can get galvanized nuts, bolts, and washers, from home depot that fit the holes and create your own mount. This is a strong cabinet, with thick ABS plastic, it can handle quite a bit of hardware. Just be sure to mount this to studs especially if you plan on filling it up.Use velcro for cable management and leveling.That's about it, this is a great alternative to getting a small rack cabinet
Jordan Schamberger
2025-05-27 15:28:58
Fit the black box for my Frame TV perfectly.
O
2025-03-21 11:29:20
Used this for the control box for a new Samsung Frame TV installation. Lots of measuring and remeasuring and it worked perfectly.
Claudia Velázquez
2025-03-17 12:01:38
Sarisfecho con la calidad del material. El único pero que le veo es que los tornillos con los que viebe no sirven para cerrar la tapa, ni para empotrarlo a la pared. Se debe considerar comprar unos adiciones. Por lo demas quede satisfecho
Jeff
2025-03-05 12:47:04
Easily fits in between studs and is lathe enough to mount the box for a Samsung smart tv with a bit of extra room for other cords.If you have a frame tv, you need this!
Evon Bartsch
2025-02-02 13:51:39
It’s exactly as pictured. I’m using it to hold my frame tv box as it’s huge and it fits in this perfectly. exactly what I needed, just need to install
erikb
2025-01-22 14:42:44
Fits perfectly between studs on 16†centres . Deep enough to mount av or wifi hub . No issues with router interference either. Great product!
Auto guy
2025-01-17 16:09:31
I like that this cabinet provided a place for all of my network gear. I have two small patch panels, two switches, Apple Time Capsule, Ubiquiti UDR, Raspberry Pi 5, and a modem in here. The brackets for devices are very expensive for what they are, but they fit it very nicely. I see on Etsy there are people who will make 3D printed brackets that work very well for these cabinets.
Recommended Products
