Your cart is empty.
Your cart is empty.Easily Installs New Wheel Studs. Use with a ratchet or impact wrench to pull the new stud securely in place. Position the tool over the stud shaft. Tighten the lug nut against the tool to pull the stud in place. Works on most all automotive and light-duty truck wheel studs, import and domestic. NOTE: The bearing will wear with use and is not warranted.
WESIII
2025-08-18 17:48:33
At first when I looked at this in the package I thought I paid how much for this? Then I opened it. It’s actually a lil genius device. It has a bearing on one end of it that is replaceable. If you are a DIYer you’ll probably never have to bother. It’s so easy to use. Made quick work of putting extended ARP studs on my hubs.
Kevin S.
2025-07-23 19:47:42
I didn't think it would make things that much easier but it does! totally worth it and very quality tool
Gideon C.
2025-07-06 18:22:27
This item works great for installing new studs - easy to use and quickly pulls the new stud into position and seats it. Worth getting
DY
2025-07-01 12:10:13
Made my wheel stud installation easy! Was easier than I thought with this tool.
J. Johnson
2025-06-02 17:33:11
After having bought a used 2016 Subaru Forester, I found a number (OK, LOTS!) of cross-threaded hub bolts.I bought replacement bolts, along with this Lisle 22800 tool. I've always been happy with Lisle tools, and deliberately chose to buy this one, versus a "generic" cheaper version.The tool worked VERY WELL to install the new hub bolts. No drama at all.Thanks, Lisle!
Dustin Eller
2025-05-31 13:59:27
It works great
SubiTuner
2025-05-13 17:52:02
Great product in helping me change my stock wheel studs to ARP wheel studs.
Joe Smuckatelli
2025-05-04 21:53:08
This little tool is awesome. I swapped out 10 studs with no problem today. It felt great because when you deal with cars there's always something I to crop up and make things more difficult. I suggest getting this name brand tool and not the knock offs. You'll be glad you did
PeterA
2025-04-25 16:15:59
Great product well made did the job I was working on.
Crisanto
2025-04-04 17:23:42
Herramienta super necesaria para no dañar birlos. Muy práctico
Tibi
2025-04-02 20:24:12
I had to buy studs from Canadian tire to replace the one I broke by over-tightening. Bolt was around 2$ each.To replace all 5, first I tried to remove the brake rotor but it was stuck. So I just hammer the broken one out, exactly in that position. It came out so easy, with a small dollar store hammer ( just to make sure I was not to heavy on the hit)In the back is plenty of clearance after you remove the brake caliper. After I use a bit of grease and the tool to tight the new bolt. It worked so easy, no need to hold the rotor ( it was in neutral to spin all bolts to that location).I did not seat the bolts completely, to stress the bearing of the tool, since I tight the wheel nuts much harder.Overall nice job using the tool.
Jörg Köhler
2025-02-28 13:48:52
Funktioniert sehr gut
Customer
2025-01-06 17:36:30
I did not use a stud installer before this and damaged a nut on the install. The Lisle bearing allows for a smooth pull of the stud from the front with no damage to the brake face or the nut. Small detail, but worth using and much simpler. 5 outta 5.
Recommended Products
$38.39
$ 16 .99 $16.99