Your cart is empty.
Your cart is empty.A heavy-duty puller for the large pitman arms on Ford 250 and 350 trucks. Jaws are forged and heat-treated for strength. Position puller jaws under the pitman arm, turn center screw to remove. Opening is 1.70 inch, Inside Length is 2 5/8 inch , Width 3.08 inch and overal length is 3 9/16 inch.
Kirt
2025-09-02 16:03:16
This thing is Tough! I went through two of the liter duty pullers and broke them both. This thing worked great the first try. I highly recommend this.
Bill Smith
2025-08-29 15:36:23
This was up to the task of pulling a seated, rusted 22 year old pitman arm. The stress it was under was substantial. It held up and did the job!
Justin W.
2025-08-28 11:09:58
Works for dodge 2500. Great buy for the money.
Juan Z.
2025-07-28 17:50:47
I received a heavy duty well built tool! Worked well! I would recommend
N. Reilly
2025-07-27 18:36:02
had to open this baby up to fit on my Chevy Suburban. No big deal with a Bridgeport or similar knee mill. I generally think everyone needs a Bridgeport anyhow so best get out there and use this tool to its full potential. Sturdy and well built, with plenty of extra meat for my end mill to take off, and good flat sides for easy clamping in my vise.
Early Xer1968
2025-05-23 12:13:53
You can tell a cheap tool just by looking at it. This pitman arm puller doesn't look cheap, it looks like it's military grade. Not very expensive either. My pickle fork wouldn't work on the tie rods or idler arm so I used this tool and it easier to turn a threaded rod than to keep pounding at the end of a pickle fork with a big hammer. When it came to the pitman arm on this old 1996 Chevy truck, I was to the point to where I thought it wasn't coming off or the arms on the puller would break. It didn't . One more revolution and it came loose. For the price, it's well worth it.
T-ITUP
2025-05-01 17:38:40
Absolutely the best pitman arm removal tool for a 2021 Jeep Rubicon JL. It's heavy duty, the tongs will not slip, a smug fit and after after about 2 rotations, the arm dropped. Of course I used a robust breaker bar. I'm very impressed with this tool. Recommend the company advertise this tool compatible for the 2021 Jeep Rubicon JL and perhaps other similar year models with the mega/large pitman arms.
Scott Cunningham
2025-04-23 14:57:51
Used to remove Duramax parts on a 2006 gmc Sierra 2500 Duramax. It is better than harbor freight or the aluminum ones you find elsewhere. It is also wider so not a direct replacement.Lube the threads before you use it.
jon boxerman
2025-04-21 10:34:42
I used this puller On a 2012 ram 3500 with the upgraded larger steering box, and it worked perfectly! I had read reviews where the part broke, so I was careful to only apply so much tension and then help it out by hitting the Pitman arm with a hammer to break it free.
andrew
2025-01-23 16:17:41
Works good, make sure to lubricant the treads before using to cut down on wear. I’m a journeyman automotive mechanic, I use this once to twice a week has held up awesome.
Jason Cartwright
2024-12-27 11:46:05
Had to grind off a small patch to fit on pitman arm, but saved me a major headache getting it off
Steven Kennedy
2024-12-15 14:43:13
Great product, does the job
Kurtis
2024-11-22 14:32:58
Works great on Ford's tried it on a Dodge and didn't work too well
Recommended Products
