Your cart is empty.
Your cart is empty. Product Specification
The flange makes the Nylon Insert Flange locknut ideal when assembling components that consist of thin materials, slots or non-precision oversize holes. Mating part must extend at least one thread past the flange nut top surface to assure locking element engagement.
Product Type: Nylon Insert Flange Lock Nut M12
Inside Diameter: 12mm
Pitch Size: 1.75mm
Material: Stainless Steel 304
Package Included
10 x Nylon Insert Flange Lock Nuts
Warranty
OUSCHR hardware has the highest quality on the market. Buy with confidence. Money back or exchange guarranteed.
Andrew Ostrom
2025-08-11 13:53:46
Basic flanged nylon lock nuts in 18-18 stainless. The threads are good and the finish is fine. They're nuts - how much can you say. I use a lot of different ones - these are primarily for the shear pins (bolts) on my John Deere tractor's 47" snowblower. Perfect replacement for the expensive ones at the Deere dealer.
David X
2025-08-10 13:22:31
Strong, screw on tight, don't loosen.
Ex-Spook
2025-07-11 12:35:01
Nothing more to add
ltjdrich
2025-06-30 10:33:16
These are very robust flanged locking nuts made of 304 stainless steel and appear to be at least Grade 5 or better. They came ridiculously well packaged in a reusable plastic box which makes this item incredibly convenient to store without the concern of loosing them all over the shop. Because they are so beefy however, they are somewhat deep measuring 5/8".
Bob K
2025-06-23 13:51:13
I bought them with a specific project in mind, due to a broken bolt I had to go another route. They will be used elsewhere!
Kevin
2025-06-12 20:53:50
Looked and function good. Arrived on time
Craig Rayburn
2025-06-05 15:48:14
Works as described good quality
Chris Michaud
2025-04-26 15:00:15
Super nice finish on these nuts. Threads are cut perfectly. Ordinarily I would not use stainless hardware due to the cost, but these are priced so reasonably that it is no problem to do so.
Valerie L Carr
2025-02-26 17:17:13
Fit and worked.
Customer
2025-02-20 11:48:43
The nuts that I received were not the correct thread pitch as advertised. These are much coarser than a 1.5mm.
Recommended Products
