Your cart is empty.
Your cart is empty.Product Description
Is there any advantages of the product?
✔ Material - Threaded rod made of 304 stainless steel, provides great corrosion resistance and antirust ability for long service life.Fully threaded rods are widely applied in many occasions.
✔ Fully Threaded Design - Neat and clear thread, exquisite workmanship, entire threaded design, allowing for a secure connection on both ends, which makes it great for applications where the rod needs to be fully engaged with nuts or other fasteners.
How to use it?
✔ Select the appropriate size threaded rod, connect the nut on the machine, and tighten it
What should I notice?
✔ All size above is measured by manual, please allow +/-0.1 inch error.
Specifications
- Type: Fully Threaded Rod
- Material: 304 stainless steel
- Thread: Right Hand Thread
- Easy Installation: Fully threaded rod stud is easy and convenient to use.
Fully All Threaded Rod
304 Stainless Steel Right Hand Thread Screw
Suitable for furniture mounting assembly fastening, screw into threaded nuts or tapped holes. Widely used for anchor bolts, clamps, hangers and U-bolts and many more projects where a metal rod with continuous threading or no head or fashioned tip is required
Application
Wide Application - The bar studs are commonly used for securing components and machinery in place and provide reliable support, such as used in the assembly of equipment, machinery, furniture, machine tools, etc. Also used for bolts, clamps, hangers, u-bolts, garden stakes and other projects where a metal rod with continuous threading.
Badbugsloveme.
2025-09-03 10:26:13
Love them
TX_Neener
2025-09-01 15:00:21
All the pieces were included and the stakes are a good length for making small decorative plant stakes. These are definitely shorter than the average size I see, but that was communicated in the description and I ordered these for some height variety in the garden. They worked perfectly for using up the rest of our spacer beads and making stakes for the smaller indoor potted plants.
JB
2025-07-29 12:44:39
They are stainless steel rods. They are as they were presented in the photos. I'm not sure who they are advertising to (I'm not sure what a "beaded garden stake" is) but I use these to make glass knob and drawer pulls - applying hot glass to the ends. I'm able to get 3 to 4 knobs out of each length of steel.
Hank B
2025-07-19 11:12:16
One of the 6 threaded rods is bent. Not sure I can straighten it, but I will try. Might have to use heat.
jonathan Koren
2025-07-03 14:39:08
I bout a package of six 300 mm threaded rods, and two of them had their threads cut wrong. On rod, the diameter increases for a bit in the middle, making it impossible for an M4 but to travel the full distance of the rod. On the other rod, the threads aren’t cut deep enough, again preventing a nut to travel the whole distance.This is just the lathe not being monitored correctly.I needed six 300 mm rods. I got four, and two pieces of junk.
Yeok
2025-06-03 15:03:23
I purchased the M4 x 100mm Fully Threaded Rod & Studs for a small DIY project, and unfortunately, I was not impressed with the product. The threads on the rods were not as precise as I expected. When trying to screw them into nuts or tapped holes, they felt rough and didn’t align smoothly. This made the assembly process frustrating and time-consuming. While the product claims to be made of 304 stainless steel, the rods felt less durable than I anticipated. One of the rods even bent slightly when I tried to tighten a nut, which was surprising for something marketed as having "good toughness."Although the description states a total length of 100mm/3.94", I noticed slight variations in the lengths of the rods. This inconsistency made it difficult to use them for precise applications. While the product is advertised as suitable for various applications like anchor bolts, clamps, and hangers, I found it difficult to use effectively due to the threading issues and lack of durability. The package includes nuts, which is a nice touch, but they didn’t fit well with the rods. The threading on the nuts didn’t align properly with the rods, making them almost unusable.Positives: • The rods can be drilled, cut, and shaped, which is useful for customization. • The corrosion-resistant properties of stainless steel are a plus, but only if the overall quality were better.While the idea of this product is good, the execution falls short. The poor thread quality, inconsistent lengths, and lack of durability make it difficult to recommend. If you’re working on a project that requires precision and reliability, you might want to look for a higher-quality alternative.
cliff P.
2025-04-11 11:57:45
Good quality. Does the job.
terri olley
2025-02-24 12:11:05
As it says in description
Greig Parry
2025-01-26 17:34:27
Excellent Product
Alfred Cornick
2025-01-13 18:41:50
Great product many thanks
JohnWells
2024-12-29 10:44:29
These threaded rods and nuts are pretty much what you’d expect.The threaded rods are cut almost perfectly (very slight variance) and are slightly shorter than expected (typical 13.875†in length). I thought I saw some thread damage on one rod but I’m able to screw the nut over this section without issue.Note that these are M4 size – quite thin and note suitable for perpendicular loading (the rod can be bent by hand).
Recommended Products