Your cart is empty.
Your cart is empty.Perfect for making flat lightweight items magnetic. Magnet requires direct and full contact with steel for maximum hold, therefore it is best to make sure that magnet is flat. Magnet & adhesive work best when applied at above 60 degrees Fahrenheit or 15.56 degree Celsius. For best results: 1)Allow magnet to reach room temperature then cut magnet with heavy duty scissors or hobby knife. 2)Apply magnet's dark gray side to large metal surface for several hours to flatten curl. Do not roll magnet strip in opposite direction to remove curl. 3)Clean applicable surface for adhesive with isopropyl alcohol and allow to dry. 4)Peel back liner from the adhesive and place item on adhesive. 5)Apply adhesive to surface with firm pressure 6)Allow adhesive to cure for a minimum of 24 hours or 72 hours to reach maximum bond with surface.
Kaitlyn Poindexter
2025-08-14 12:36:05
I use this all the time tomagnetize classroom items. This magnet tape is sturdy and gets the job done.
Ron B
2025-06-19 20:19:41
As Advertised
Buys Too Much
2025-06-12 21:22:27
In case you were looking to use this for a MagLev science fair project you’ll need to look elsewhere. This is not a Monopolar magnet strip but a bipolar one. We also couldn’t change the polarity by using a rare earth magnet so in the end we used this as tracks to put the strong magnets with different magnetic N/S poles on each side.As far as a magnetic strip goes this was alright. It isn’t that strong but would work on basic conditions (such as hanging papers, pictures, etc.). The tape backing also worked well and was strong.
SGOneNiner
2025-05-15 15:59:46
Easily cut using scissors.
Kindle Customer
2025-05-14 12:32:45
This product proved to be useless. Neither the adhesive side or the magnetic side held. The adhesive not holding I could have worked around. The magnet not working, not so much. With nothing attached the magnet barely held itself up.
Pat M.
2025-03-31 17:32:23
The product was evaluated at holding up ounces of items, yet a simple double-weight 3"x3" cardstock item was not held securely on fridge by a 3" piece of magnet. Definitely not acceptable!
Jiyun
2025-03-27 10:42:28
This is a very useful product! I bought these to use for my watercolor palettes and half pans but they disappeared! My dad apparently came into my room and saw them and took them cause he needed them lol.These aren't strong enough to hold knives or anything heavy. It's a standard rubber magnet great for crafting and other trivial things.
Donna
2025-03-08 15:02:28
Love this magnetic tape. Holds everything I need it too.
Pablo
2025-03-05 12:44:44
Compré esta cinta magnética para sostener una puerta de madera que se levanta y funcionó perfectamente. El único detalle que le veo es que en la parte de la madera se empieza a despegar de las orillas, como que le falta un poco de fuerza al adhesivo que tiene la cinta pero en cuanto al imán me funcionó perfectamente
wael
2025-02-11 16:40:17
hope to get cheaper
Arthur Rowlings
2025-01-31 15:24:44
Magnetic strip not strong enough for the use I wanted but works for many other projects
Victor
2025-01-24 18:14:37
No es tan magnético como el tÃpico imán pero es funcional para la mayorÃa de superficies, el adhesivo no es el mejor pero aguanta, lo considero una buena adquisición si quieres adherir algo ligero al metal de ventanas y otras estructuras de metal sin dejar pegostes y siendo fácilmente removibles y reutilizables, personalmente los utilicé para mosquiteros y funcionaron perfectamente, eso sÃ, la cantidad se acabará más rápido de lo que se puede anticipar
Norm Parrott
2025-01-18 11:57:10
Installed this on an RV cabinet wood panel to replace screws. Used metal tape on the cabinet side. Some of the strips I put on ended up peeling off, but a small amount of Weldbond glue insured that they stay in place.
Recommended Products
