Your cart is empty.
Your cart is empty. Description
"This silicone oil filled tridicator/thermo-manometer is designed for media which is not corrosive to brass, also where vibration and pulsation is a concern, Heating, Ventilation, Air conditoning, Cooling are typical applications.
Dial size: 2-1/2""
Process connection: 1/4""NPT lower mount
Case: 304 stainless steel case and crimped ring
Window: Polycarbonate
Dial plate: aluminum, with pointer stop
Pointer: Aluminum, black, DIN style
Bourdon tube: Copper alloy
Movement: Brass
Connection: Brass, one piece design
Oil cap: rubber, gray color
Filling: silicone oil filled, dampens the effect of vibration and pulsation; lubricates the movement and extends the life of gauge.
Bimetal system for temperature sensor
IP class: IP67
Accuracy: +/-3-2-3%
Range: 0-160psi/30-250 deg F double scale
Working temperature:0 to 220 deg F
Ambient temperature:140 deg F maximum"
Measureman has 20 years rich experience in the measuring of pressure, temperature, flow, level industries, The "Measureman" branded products are the combination of continuous good quality and affordable price. "Measureman" products are selected and designed by professional engineers.
JReneK
2025-09-03 13:33:15
Very nice gauge. works great on my 4L60E transmission
Pragnaben Patel
2025-09-01 11:51:26
Worked perfectly with my heating system boiler.
Kristopher S. Weber
2025-08-28 17:58:12
Great product and really enjoy the colours. I used them for a project and didn't really need the accuracy. I bought two and hooked on the same water line that runs about 60psi. They read 10psi different, but at the price these are sold, they are not calibration prices. Thank you for providing them. I love the temperature on them too. Without the long sending bulb they take about 5 seconds to read, but exceeded my expectations for the project I needed them for.
Cody Key
2025-08-27 13:47:52
It's a gauge. Simple. Pressure needle is good. Temp needle won't go above 100â° for some reason.
dysfunctional vet OIF
2025-07-17 16:47:20
pressure readings are taken right at the pump house where the water goes to the garden. the temp is important as i can compare the temp leaving and the temp at the drip emitters and get an idea of the btu absorbtion along the route.this has helped me to modify some water schedules.
GRO
2025-07-13 13:29:13
I need to keep an eye on the temperature of epoxy resin as it cures in the pressure pot. This gauge makes it easy to check both psi and temp, and the large gauge makes it easy to read.
JacksonJames
2025-07-06 18:51:35
Used this on my Wilkerson regulator and so far very happy. I was not thrilled with the amount of Glycerin used to fill it. There was a large bubble in the top making it hard to see the pressure. I filled it with vegetable glycerin and it seems to be different than what it is filled with from the factory causing it to separate. However I like the dual use of it with the temperature and pressure.
Fernando
2025-05-13 09:27:36
Using to measure reverse osmosis pressure and temperature for aquarium use.
Bernard
2025-05-07 11:28:00
Fonctionne bien
Grant
2025-04-29 12:47:41
exactly as discribed good quality
Customer
2025-02-11 09:32:55
Overall, the unit does the job well. For my application on a heating boiler it would be beneficial if the scales were reversed so it was a finer range on the pressure as opposed to temperature
Alain
2025-01-06 12:28:11
Pour ma fournaise
Keven
2025-01-04 10:12:24
👌
Recommended Products
$79.00
$ 30 .99 $30.99