Your cart is empty.
Your cart is empty. Description
For hydraulic, oil pressure, water pressure, air pressure measuring, for media which is not corrosive to stainless steel wetted parts
Dial size : 3-1/8"
Pressure Range : 0-10000psi, bar, Mpa, 5 digit display, 3 units, 0-10000psi, bar, Mpa, 150% over load
Batteries status display
Process connection : 1/4"NPT male, lower mount
Overload Capacity : 150%
Accuracy : 0.25%
Input Voltage : 3.0V (two 1.5V AAA batteries)
Working temperature : -4 to 140 deg F/-20 to 60 deg C
Ambient temperature : 140 deg F/60 deg C maximum
Case : 304 stainless steel
Wetted parts : 316 stainless steel
IP Class : IP54
How to operate :
Button Description :
Power button : Long Press to Start up/Shut down
UNIT button : Short Press the button, cyclic switching the pressure unit
ZERO button : Press Zero button for 5 seconds, Calibration zero
LIGHT button : Press Light button start up/shut down backlight
Package Content:
1 x Digital Pressure Gauge,
1 x Operation Manual.
Measureman has 20 years rich experience in the measuring of pressure, temperature, flow, level industries, The "Measureman" branded products are the combination of continuous good quality and affordable price. "Measureman" products are selected and designed by professional engineers.
Happy Customer
2025-09-07 16:30:15
Arrived on time, works well and was perfect for my application of measuring water pressure at my house due to gravity feed from an elevated tank.
Caleb Smith
2025-08-31 12:32:55
These are a very cheap alternative to the other brands and work just as well! I’ve check checked accuracy along side liquid filled gauges and they have been spot on!
John L.
2025-08-27 12:32:52
This is a really nice precision gauge, that works well and so far seems reliable. But until I had it in hand, I didn't really appreciate how bigt this thing really is. Including the protective rubber boot it is over 3 1/2" in dimameter, over 2" thick, and over 5" tall (including the fitting at the bottom).I have no better gauge against which to check accuracy, so for now accept the accuracy spec as stated.But I have 2 issues with this unit:1. It responds *very* slowly. It takes more than 15 seconds to get a stable pressure reading when given a pressure step. That makes it excessively slow to use for fine pressure adjustments. That's fine if all you need is an accurate reading of a stable pressure, but if you need to quickly adjust pressure very accurately you should probably pick a different gauge.2. Changing batteries is a PITA. The battery compartment is on the back of the unit, covered by both a large round metal cover (secured with 3 screws) and the rubber protective boot. So to change batteries you'll typically need to dismount the unit, remove the boot, unscrew the cover (being careful not to lose the screws), change the batteries, re-install the cover (noting that the screw pattern is not symmetrical, so you have to orient it properly even though "top" isn't marked), re-install the protective boot, then re-mount the gauge. That's a LOT more work than it ought to be.I've modified the boots on both of my units as shown in the photo. On one I opened up nearly the entire back of the boot to allow removing & re-installing the metal cover plate without removing the boot. On the other I've permanently removed the metal cover, and cut a rectangular opening just large enough to easily remove & install batteries. The latter would not be acceptable in a high-vibration environment. I see no justification whatever for making what ought to be a very simple battery replacement operation so absurdly difficult. The battery compartment ought to be covered with a snap-open or single-screw cover accessible with the boot in place.But other than the slow response and the battery compartment stupidity, I really like this gauge -- enough so that I've bought two, and wouldn't hesitate to buy more for applications that can live with the slow response.
Ralf and Starla
2025-08-03 10:51:19
I got to use my new digital gauge today and have to say, I love it.It is so nice to switch in between the various units like PSI, bar, kpa and Mpa.You always have to give it a little time to get adjusted to the pressure. But I have found that to be the case on any digital measuring device. The electronic takes time to adapt and calculate.I unintentionally left it on over night, but no problem.Now I can retire my collection of analog gauges and won't blow up a 600 PSI gauge anymore, because my pressure accidentally went over a thousand.
Scott
2025-07-30 17:05:59
The gauge worked fine but the reaction time was too slow for what I needed it for (filling aircraft tires). I needed a gauge that would go over 250 and this one did but I had to wait 5 or more seconds before the readout would change to the actual pressure. If it were not for that I would have kept using it.
Greg Phillips
2025-05-28 15:47:50
I am very pleased with this gauge. I have used it several times now and it is working great. I am a diesel mechanic. I have used it to measure fuel and so pressure. It has been accurate so far. I will probably by more in the future because there are times I need to have multiple pressure gauges hooked up on the same truck.
OceanBlue
2025-05-12 10:18:05
Gauge seemed of good quality. It appeared to be well made had a nice display and easy to use.2 Major Issues1. The gauge did not come wrapped or packaged correctly. The instructions were tattered due to the fact that the gauge was able to slide around in box.2. The gauge was not as shown in picture. The picture shows a white label on neck of gauge with S/N pressure rating and accuracy. The main reason why I purchased this product. The one I received had none of that information. Reached out to Measureman about this issue. They never got back to me.Returned gauge not based on it quality or accuracy but have no faith in a company that misrepresents a product
simmie jones
2025-05-03 13:52:36
Second one I am using. Accurate and quick!
lyle williams
2025-03-28 12:44:41
fantastic pressure gauge, fast delivery
Customer
2025-03-25 10:00:36
Good and not so good...put it (0-100Psi) on a dead weight tester to check it and was pleasantly surprised by the accuracy (mine is better than stated spec) even at the bottom of the range. Was not impressed with the refresh/update speed though...painfully slow to reach/indicate the test pressure.
ScubaNV
2025-03-07 17:48:16
Needed high pressure gauge and this one fit perfectly. Reading the pressure from a distance is good and it has a light also.
Derek
2025-02-21 15:51:21
Doesn’t read low pressures say under 20psi accurately. I have to do a residual pressure test on a brake component once the service has been applied and released. It’ll read the 600-800 psi perfectly(checked it against two other gauges) but the residual pressure is 0-20psi and it won’t read anything most of the time.
kevin tumke
2025-01-10 15:54:30
Works good to take pressure, it was reading approx 1lb diffrent off of the brad name guages.
Recommended Products
$169.88
$ 68 .99 $68.99