Your cart is empty.
Your cart is empty.This pressure test gauge and valve body assembly is intended for pressure measuring in the gas line or tank. Dial size : 2" Connection : 3/4" NPT female, gas test body in chrome plated steel Gauge case : Black steel case and bezel Bourdon tube : Copper alloy Dial and Pointer : Aluminum, black.Window : Glass Internal Wetted parts: Brass/ copper alloy. Accuracy : +/-3-2-3% Working temperature : -4 to 140 deg F/-20 to 60 deg C Dial size : 2" Connection : 3/4" NPT female, gas test body in chrome plated steel Gauge case : Black steel case and bezel Bourdon tube : Copper alloy Dial and Pointer : Aluminum, black.Window : Glass Internal Wetted parts: Brass/ copper alloy. Accuracy : +/-3-2-3% Working temperature : -4 to 140 deg F/-20 to 60 deg C This pressure test gauge and valve body assembly is intended for pressure measuring in the gas line or tank. Dial size : 2" Connection : 3/4" NPT female, gas test body in chrome plated steel Gauge case : Black steel case and bezel Bourdon tube : Copper alloy Dial and Pointer : Aluminum, black.Window : Glass Internal Wetted parts: Brass/ copper alloy. Accuracy : +/-3-2-3% Working temperature : -4 to 140 deg F/-20 to 60 deg C
Dan B
2025-08-24 17:07:54
Worked great on my new natural gas line to my whole house standby generator.
J. Hilliard
2025-07-22 11:29:45
Well-deserved 5 star rating. Bought this gauge because it was cheaper than piecing all of the things together that I needed. Installed a natural gas line on a home that I'm working on. Wanted to do a pressure test before I covered everything up and actually put gas through it. Ordered this and it showed me that I had a few leaks. I've installed gas line before and had the gas company check it and didn't have any problems. On this system, I had quite a few issues. One of the joints I forgot to put the tape on, so that was leaking. Fixed that and still had a leak, just not as intense. Kept finding leaks in the dumbest places but I fixed them and moved on. Checked every joint that I made with soap and there were no leaks coming from it but I still was losing pressure. Can't say how many times I thought this gauge might have been leaking and I checked it every time but no part of it ever leaked. Finally found out that I had a ¾ elbow fitting and a ¾ tee fitting leaking at the seam where the casting was put together. Also found a union that wouldn't seal no matter what I did. Found the leaking Tee by chance because some soap had run down and it was bubbling on the seam. Fixed that and the pressure would hold longer. Still had a small leak though so I started checking everything and found a 3/4 inch elbow that had the same issue. Fixed that elbow and it's been holding 60 PSI for 3 days now. Definitely not a problem with this gauge, great investment. The reason I hate it is because it took quite a bit of climbing around to fix the leak that this gauge found, which is a good thing.Might want to be careful of the Home improvement store that likes green, that's where those leaking fittings came from.
Frank from South Kingstown, RI
2025-07-18 16:08:43
The Guage was cross threaded, no sealant on fittings. I'm returning it, I wasted a lot of time trying to fix it.
Wahali
2025-07-09 13:48:54
For the price it's an excellent tool. Maybe just for a one time job or more. I can't speak to the longevity but it appears well made. I figure a long as you take care of it it'll last. I ran a csst line in combination with black pipe stub out. I used a handheld air compressor to get it to 10 psi. It held for over 15 min. Propane company came out and hooked me up. This helped to insure the job was done right and safe
Gregory J. Cotton
2025-06-29 13:20:44
It's nicely built and perfect for my use. The only problem is that I ordered the 60 psi version and they shipped the 30 psi version. In my case it's not important since I was going to change it to a 160 psi gauge and the 60 psi gauge I ordered would be more useful in my pile of stuff. Not worth trying to exchange it. Bought a 2nd unit a few days later, ordered it again with 60 psi gauge and, yet again, they sent the 30 psi gauge. Anticipating this I also ordered a 160 psi gauge to replace it with. Now I've got two 30 psi gauges that aren't very useful for my uses. The price was right, just don't expect to get the 60 psi gauge if you order it, you'll still get the 30 psi unit.
joseph e.
2025-06-27 15:14:50
Worked as it was supposed to
Steve
2025-05-03 11:46:36
I was skeptical of the quality of this product based on the purchase price but it is well made and functions perfectly for my use.
Michael Roche
2025-04-29 14:34:18
Not me ch to say it worked
Paula M
2025-04-20 14:44:47
Gauge damaged in transit, but worse still it clearly wasn’t a new item as it has damage from use on the chrome and the thread was split from over tightening
Ralph Brockie
2025-03-14 20:48:27
Works as it should, no problem
Ivan
2025-02-10 10:59:53
The quality of this product is not up to standard. There are times that the reading did not work.
Recommended Products
