Your cart is empty.
Your cart is empty.Use Meguiar's M105 Mirror Glaze Ultra-Cut Compound to remove scratches, severe swirls/holograms, acid rain and other defects from your paint finish and leave it with a best-in-class mirror-like gloss. Our exclusive super micro-abrasive technology features ultra-fast cutting ability to remove 1200 grit or finer sanding marks. This professional grade formula is safe and effective on all glossy paint finishes, including clear coats. (1) Title draft language created by generative AI and reviewed, edited, and revised by Meguiar’s.
J Ware
August 26, 2025
I definitely recommend this cutting compound. I smooths out minor abrasions, takes out swirls from sanding, and is a good way to prep for polishing. This is a good price and a good value for what it provides. It will keep a vehicle looking nice.
RTChoke
August 23, 2025
I’ve used this for paint correction with a random orbit buffer on several cars. The finish comes out really well with a 4-stage job.
D Magpie
July 23, 2025
I used this with a rotary buffer and a MENZERNA 6 Inch Polishing Pad HEAVY CUT for Scratch Repair. I was mainly trying to get a long 6" wide and four foot long abrasion off the passenger side of my car. I went over the sections many times and did get a good amount of the abrasion minimized. But, it is still noticeable in spots. It could be my technique or gear, but overall I felt like it was a good compound but not excellent. It is very tough to remove with a soft cloth if it dries or comes close to drying. But, it's a fine line between it being wet and smearing around or being a little too dry/thin and really having to work at it to get the residue off. It did work well at getting most of my headlight lens "fog" off. But once again, difficult to wipe off the residue.
Don
July 20, 2025
I start nearly all buff and polish jobs with this compound. Much easier and safer than using a wet sand and just as effective. Attached is a before and after on a harley davidson gas tank. I use the same brand cleaner wax for the finish
Richard
June 9, 2025
This is probably the best stuff I have used to take out heavy swirls and deeper scratches with. I have used this with a rotary with a wool pad to get out heavy swirls and the random deeper scratches at the same time in about 4 or 6 passes at speed 1600 to 1800 RPM with some pressure on the first 2 or 3 passes and just the weight of the machine the last two or so.Used it today with a foam cutting pad on the rotary at a speed of 1400 to 1600 RPM used the same 4 to 6 passes as above. Got the swirls out and finished out pretty good.I have also used this with cutting foam pads on the dual action polisher and it removed heavy swirls very well. Just not so much with the deeper scratches like the wool pad did, at least not without doing more passes with heavy pressure. Still used the 4 to 6 passes with heavy downward pressure for the first 3 passes and light pressure on the last 2 or 3 passes. This actually finishes out pretty well this way with very little need to use a polish afterwards.Im pretty sure you could finish out very well with this even by using it with a polishing pad for real light swirls ... just finish of with light pressure for the last couple or few passes.Being that this compound uses SMAT abrasives (the abrasives dont break down) this allows the product to cut really fast and allow for fewer passes than compounds/products that use DAT abrasives (abrasives that break down with more passes). Which of course will save you time and effort.This does dust up using the wool pad quite a bit.. but that is usually from having too much loaded on the wool pad along with the heat generated. If after a few passes you feel like its a bit dry you can mist the paint area with a little bit of water to reactivate the compund and do a few more passes. With foam pads I dont have near as much dusting when used on the rotary ... on the dual action however it will dust pretty good. But the dust doesnt ever hurt the paint finish or the performance of the compound.This is a great compound to use in a variety of ways. The method depends on your level of defects, paint hardness, and what you condider good enough.
Audrey W.
June 3, 2025
Amazing results, especially if you wet sand before you buff. Great product I recommend this highly. This was my first time buffing something and just look at the results! Very beginner friendly.
Stephanie Bailey
May 20, 2025
This product is great. It buffs out spots on the car and made out look like glass.
rob chascsa
May 9, 2025
It works but man is it hard to get off!!! Best way is put it on with an orbital buffer then IMMEDIATELY wipe it off! It did remove swirl marks and scratches within reason.
Andrew
May 5, 2025
I used this cutting compound to take some white scuff marks off of the paint of my black truck. It worked well with a soft pad and a DA polisher. I'm in need of more hours in a day so I can do the remainder of the truck and make it look like a million bucks!
JOSE LUIS VALDUEZA ALONSO
April 4, 2025
PRODUCTO DE BUENA CALIDAD
Juan Hernández
January 8, 2025
Muy bien cumple con lo que especÃfica.Aunque la presentación de la botella es más pequeña de lo que se ve
Michael Nikolai
December 31, 2024
It was a great product and helped polish and shine after using meguires M105
Recommended Products
