Your cart is empty.
Your cart is empty.Product Description
Insert Insulation - 10' Roll
Rated to 225 degrees Fahrenheit
LIMITS AIR LEAKS - HEAT RATED
- 1-1/2" wide by 10' long roll
- Rated to 225 degrees Fahrenheit
- Uncompressed, it measures 1-1/2" thick. Fully compressed, it measures about 1/4" thick
- Dark brown color hides more easily
SELF ADHESIVE BACKING
- Pressure sensitive adhesive
- Metal foil backing
- Simply peel off paper layer and apply
- Apply to the back of the fireplace insert flange to seal the space between flange and masonry surface
MAINTAIN YOUR FIREPLACE
- Replace your old insulation every time the insert is removed for cleaning
- Helps to limit air leaking between your insert and masonry fireplace opening
M. Minton
2025-09-03 17:54:11
We got a new insert in our stone fireplace and the bottom doesn't sit flat, the stone is not flat. There was also a gap around the surround. This insulation fixed the air leaks. It was well worth buying. Use gloves when installing because it is fiberglass.
Tim
2025-09-02 12:23:52
The product worked as expected. It was easy to install and fulfilled the expectations.
Mark Mahurin
2025-08-21 11:17:10
Good insulation. The right size for my needs, but the sticky backing was mostly separating from the insulation making it hard to peel the backing.
tc
2025-07-31 16:44:30
The adhesive doesn’t stick to the fireplace well and also comes off of the insulation.
C. Duggan
2025-07-25 10:03:03
This product worked great. Completely stopped draft coming from gas fireplace perimeter. One thing for certain be very careful handling the insulation roll. Wear gloves and br gentle so the fiberglass stays intact and not fly everywhere.
MOBinDG
2025-07-18 10:39:18
The roll was much smaller than I expected. The adhesive separated from the insulation and it was difficult to separate it from the backing.The color was tan and definitely lighter than depicted.It's still better than the white insulation that came with the new door but it's still a pricey disappointment. The front of my fireplace is natural rock so the unit doesn't snug up leaving a lot of space I'm trying to plug. I'm open to any suggestions for improvement.I also suggest wearing gloves and a mask because the fiberglass particles fly around profusely.
T. COTON
2025-07-06 15:29:03
I recently installed an insert in my fireplace and the installer did not eve bother to put anything between the metal frame and the stone of the fireplace, leaving big gaps that escaped fireplace smelling puffs with the growing outside humidity. I decided to do it myself with this product which was somewhat easy to install if you take extra care of not separating the layers of insulation from the adhesive. The adhesive is super strong, don't miss your spot, there is no way of repositioning. The length was more than enough for a large insert. Remember than you just have to put the insulation around the opening, not on the full horizontal length of the decorative plate!!
LeslieKM
2025-06-16 09:32:28
I found this product easy to install and helped stop the drafts coming into my house
JM
2025-06-10 11:49:07
Perfect for insulation around fireplace insert. Stopped drafts from chimney.
M. Minton
2025-05-25 10:32:21
We got a new insert in our stone fireplace and the bottom doesn't sit flat, the stone is not flat. There was also a gap around the surround. This insulation fixed the air leaks. It was well worth buying. Use gloves when installing because it is fiberglass.
Tim
2025-05-23 13:23:51
The product worked as expected. It was easy to install and fulfilled the expectations.
Mark Mahurin
2025-05-22 11:39:25
Good insulation. The right size for my needs, but the sticky backing was mostly separating from the insulation making it hard to peel the backing.
tc
2025-05-13 20:46:42
The adhesive doesn’t stick to the fireplace well and also comes off of the insulation.
C. Duggan
2025-05-08 15:36:49
This product worked great. Completely stopped draft coming from gas fireplace perimeter. One thing for certain be very careful handling the insulation roll. Wear gloves and br gentle so the fiberglass stays intact and not fly everywhere.
MOBinDG
2025-04-23 10:36:17
The roll was much smaller than I expected. The adhesive separated from the insulation and it was difficult to separate it from the backing.The color was tan and definitely lighter than depicted.It's still better than the white insulation that came with the new door but it's still a pricey disappointment. The front of my fireplace is natural rock so the unit doesn't snug up leaving a lot of space I'm trying to plug. I'm open to any suggestions for improvement.I also suggest wearing gloves and a mask because the fiberglass particles fly around profusely.
T. COTON
2025-04-18 16:01:08
I recently installed an insert in my fireplace and the installer did not eve bother to put anything between the metal frame and the stone of the fireplace, leaving big gaps that escaped fireplace smelling puffs with the growing outside humidity. I decided to do it myself with this product which was somewhat easy to install if you take extra care of not separating the layers of insulation from the adhesive. The adhesive is super strong, don't miss your spot, there is no way of repositioning. The length was more than enough for a large insert. Remember than you just have to put the insulation around the opening, not on the full horizontal length of the decorative plate!!
LeslieKM
2025-02-16 16:42:46
I found this product easy to install and helped stop the drafts coming into my house
JM
2025-01-25 21:34:30
Perfect for insulation around fireplace insert. Stopped drafts from chimney.
Recommended Products
$32.95
$ 16 .99 $16.99