Your cart is empty.
Your cart is empty.Product Description
The Moen M-PACT technology makes changing the look of your faucet easier than ever. Designed for use with M-PACT widespread trim kits, this faucet valve installs with an easy snap thanks to its Duralock quick connect installation system. Once in place, the valve makes it possible to swap out different styles of decorative trim kits without ever touching the plumbing--simply untwist your current trim kit from the top and lock your new trim kit into place. Durable brass construction makes this valve a reliable addition to your plumbing system. Application- Three hole.
Amazon.com
The 9000 widespread lavatory valve ().
Changing the look of your bathroom has never been faster and easier thanks to Moen's M-Pact Common Valve System. The Moen M-PACT widespread lavatory rough-in valve with drain assembly (model 9000) allows you to upgrade the trim style or swap out finishes on your fixtures without replacing the valves. So once the system is in place, you can change your decor as often as you want at any point in time -- during construction process or years down the road. All changes can be made above the deck or in front of the wall, and it just takes few minutes. Best of all, the M-Pact Common Valve System is as easy to install as a standard valve.
The 9000 widespread lavatory valve features a 1/2-inch IPS connection type, a 1224 cartridge type, and brass construction.
What Sets Moen Apart?
From a variety of styles designed to complement today's decors to faucets that perfectly balance your water pressure, Moen sets the standard for exceptional beauty and reliable, innovative design. Additionally, all Moen products come with a Limited Lifetime Warranty against leaks, drips and finish defects.
What's in the Box
Moen 9000 M-PACT widespread lavatory rough-in valve; drain assembly; installation instructions
9000 M-PACT Widespread Lavatory Rough-In Valve
At a Glance
- Moen M-Pact common valve system allows you to easily update your faucet style in the future
- Includes drain assembly
- 1/2-inch IPS connection
- Brass construction
- Limited lifetime warranty
Rain
2025-09-03 18:23:02
We purchased three of these, no incentives to write this other than finding quality products is hard and we rely on reviews, and far too many of the reviews are not helpful, or just about the cost. We installed the first Moen 9000 rough in kit with a Moen Gibson T1642 trim kit about 14 months ago and it has been flawless. It was installed in situ on a single granite bonded undermount sink in a narrow base, very tight quarters, that’s why we chose the rough in route versus a pre-assembled unit. We were worried about room but it turns out that it was way easier to install this Moen 9000 rough in kit than anything else we’ve used for a retrofit install. The trim kits so easy to install as to be trivial.We were initially drawn to this for replacing the leaky master bath faucet since the T6142 trim kit closely resembled the leaky faucet and was a close match for the guest bath faucets that were all in place when we purchased the house, a 1932 restored craftsman. The faucets were replaced about a month before purchase so were essentially new.The first guest faucet failed 9 months after we purchased the home, so we shut off that sink. Recently, the other sinks valves were both getting “sloppy†and started to leak. Upon removal and inspecting the existing valves, they were junk compared to the Moen system. Btw, home warranty would’ve put in complete junk replacements with a $65 deductible, we worked that issue pretty hard but alas, even free or cheap junks still junk.Anyway we recently elected to buy two more identical Moen rough and trim kits since this install was way tighter, barely room for a hand, and we needed easy again. However, beyond that, these are the smoothest operating valves with the most precise flow control with just a 90 degree turn that are durable and the most substantial lavatory faucets I’ve ever seen and that includes multimillion dollar homes. I don’t write many reviews, this is a well engineered quality product. Makes me smile to turn on the faucet, who knew I’m a faucet geek.
Dextr
2025-08-09 17:52:11
Install was easy, though a bit cramped (not the fault of this hardware) under our bathroom sinks.
Charles Thomas Moore
2025-08-06 12:21:33
Packaged properly and delivered promptly.
Brian Thomas
2025-07-29 18:06:41
Better than expectedLooks goodEasy to installA rating
Jreview
2025-07-18 10:09:03
My husband and I have purchased and installed 3 of these valve sets in the last year or so. If you are installing your own countertop and can attach your valves before putting the counter in place, this job will be pretty easy. Unfortunately, we couldn't do that since we had granite installers putting the counters in, so we had to cram our bodies into the vanity and work from underneath which is not easy for novices. The directions are mostly pictures, which generally drives me a bit crazy. I would prefer to have more words to better explain the pictures. I tried looking for videos on You Tube and was having a hard time finding the right valves, and eventually I found that Moen had some very good installation videos on their own website if you just search their site for the widespread valve set. The video really helped clarify the steps and I highly recommend watching the video before you get started if you are new to this. It would be really helpful if Moen just provided a reference to the online video at the beginning of the directions or if Amazon added a link on the product page.The valve sets are very heavy duty and worked properly with the Moen Voss and Moen Eva faucets that we used in our projects.
Murder & Mayhem Maven
2025-07-11 13:03:53
The product is of excellent quality
Customer
2025-07-09 11:22:38
I used this in two bathrooms. Love moengreat value for the price easy clean up
Paul phillips
2025-06-25 16:42:44
All moen products are well made
Customer
2025-06-19 16:40:10
I bought a Moen Gibson bathroom faucet trim kit to replace my old plastic faucet, but didn’t realize I needed this kit as well. So that was a bit of a roadbump but once I got this it went pretty smoothly.The only issue I had with it was getting the brass washer screwed on to the cartridge. It took a few tried to get it properly seated so that it would screw on to match what the instructions showed. Also, despite having measured, the holes in my sink basin were a fraction too close together to have the cold handle sit flush - I blame the old sink though, it’s not the fault of the product. It still looks fine and I filled it with tyvek tape in the meantime before I figure out something more permanent.Other than that it went together just fine for a first plumbing project and I’d definitely consider installing other Moen fixtures.
Tamara Lane
2025-06-18 12:30:31
Excellent quality.
Customer
2025-04-21 12:37:58
Exactly what I needed for my replacement that arrived the next morning with easy directions. A plus
parmjit s athwal
2025-04-12 17:07:30
New 9000 focet rough in better design than the old one
Garry Bambrick
2025-02-14 16:48:53
this was required as part of installation
Recommended Products
$38.99
$ 19 .99 $19.99