Your cart is empty.
Your cart is empty.Backed by superior materials and rigorous testing, MOOG® sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Mitch
2025-09-06 17:13:56
I don't normally write a review but these work great! I have a 2006 4runner with a 30mm sway bar. I had a clunk noise when going over bumps so I replaced sway bar end links and these sway bar bushings. Even though the end links did not help the noise, they were blown out so that's good. Next I installed these bushings and boom, noise is gone. They fit perfect!Be careful removing the bolts on the bracket. The nuts are inside the tube frame and lightly tacked in place. One side went from a 10min job to a 1-1/2 job. I don't know how long the bushings will last but its easy to swap so if it's once a year, no biggy.
Nicholas G. Dupre
2025-08-29 10:49:28
2003 V-8 4runner Limited 4WD. If you are going to leave the factory skid plate in place to change these out then you need to determine whether you have the right length socket extension. Not all short 3/8 drive extensions are the same length and the head of the bolts that are holding up the sway bar bushing brackets line RIGHT up with the edge of the skid plate, unfortunately. It was also a little tricky to get one of the holes lined up during the reinstallation of the bracket so be sure to have a good long and thick screwdriver handy to line up the bracket to the frame bolt hole for the bolt to enter so you can start some threads.I am not sure I could feel much of a difference and worst of all I still have a clunk. My sway bar end links are good, new ball joints, whole new rack and pinion with inner tie rods. 3 year old ToyTech lift with Bilsteins that are still good and not leaking.This is still a good product and certainly worth the money and DIY time and effort. If for nothing else do this for the process of elimination if you are hunting down a clunk.
Jason C
2025-07-11 09:43:47
Quality feels good. Installation fit was good. Would buy again.
Charlie
2025-06-30 10:51:31
Working good ðŸ‘
Dennis Flowers USA
2025-06-20 13:19:47
Fits 2008 lexus gx470
jameson
2025-06-12 15:03:07
Fit could be better, it's a little loose on the swaybar
GRS
2025-05-25 14:34:18
These solved a clunking noise I had when going over bumps. My old bushing was worn enough that I could move the sway bar by hand. Perfect fit on a 2006 Toyota 4runner.
aaron
2025-05-18 17:22:27
As described, good material, I recommend them. I put them on my 2007 FJ Cruiser, and the color looks good.
Gabriel
2025-04-03 16:44:28
Me gusta comprar solamente refacciones de Buena calidad para evitar andarlas cambiando regularmente, moog es muy Buena calidad y atravez de amazon las consigues facilmente y te llegan rapido.
Customer
2025-02-02 10:09:15
As advertised!Well made product...after all its made in the USA! Easy to install and it does what is should. Installed in my Lexus GX470...and no more rattle from the front end...11 trips last year scouting for/elk hunting in the northern Canadian wilderness over rocks and muddy back-roads chewed away my old sway bar rubber bushings...the new cool looking bushings from Moog made my Lexus GX470 drive like new again...and it only took me 45 min to install. They fit perfect and are made of much better material than original rubber. Thanks Moog.
D.R. Walker
2025-01-15 12:36:26
made a great difference to the handling
Ian
2025-01-07 10:10:14
Works as should
Recommended Products
