Your cart is empty.
Your cart is empty.Product Description
MORLORDY - Your RC Crawler Car Assistant
With high-performance accessories and let them perform great running them on your 1/24 rc crawler car SCX24!
MORLORDY 1.0 Beadlock Wheels
Superior Quality 1.0 Wheels
Alloy construction made it more durable, Lightweight upgrade instantly enhances overall performance.
AMAZING Multi-Function
The heat dissipation ability is strong. Shock-proof and high crush-resistant Beadlock allows you to swap to different tires.
Easy and Convenient to Install
Easy for carrying. Don't need complicated installation steps, easily installation is complete.
1.0 inch wheels size display
Detail
- Outer Diameter: 28.5mm / 1.12in
- Thickness: 16mm / 0.63in
- Hexagon Adapter: 7.5mm / 0.3in
MORLORDY 1/24 Scale RC Crawler Car Accessories
Suitable for 1/24 SCX 24 AXI90081 AXI00001 AXI00002 AXI00004 AXI00005 AXI00006 RC Rock Crawler Car.
- High-Quality Alloy Aluminum Wheel Rims will make it more durable. The heat dissipation ability is strong.
- Axial SCX24 Upgrades, Beadlock is designed to strengthen the connection between the wheel rim and better. Also has High Crush Resistant performance,.
- Easy and convenient to install and remove, easy for carrying. Don't need complicated installation steps, easily installation is complete.
- SCX24 Upgrades Metal Wheel Rims Set include 4pcs 1/24 RC wheel rim ONLY.
MORLORDY SCX24 Wheels
Nate
September 2, 2025
It is well made and has a nice scale look.
Khalifa Alboinen
August 30, 2025
These wheels look amazing and are easy to assemble. I have them on my FCX24 and they look amazing with the blazer body. You will have to drill them out and either get some wider hex extensions or some washers to shim them out for the FCX series trucks though. I’m sure they fit the SCX24 well.
Harper
August 19, 2025
I like these rims (and tires). I ordered the tires first thinking I could put them on my stock plastic rims that turned out to be a pain and I was gonna have to glue them so I ordered these rims. The first 2 out of the package went easy, remove the 4 little screws with a 0.5 put the tires on and reinstall the screws. The next screws on the next 2 rims were super tight. All 8 screw heads stripped 🤬 ended up using tiny needle nose pliers to grab the outside of the screw heads. After I got them out I had to use the needle nose to retighten them also. I like injora products and maybe I got rims from the new guy or something. Will be looking for a replacement screw set even tho I don’t plan on taking them apart I want to be prepared next time I order rims or something else.
Steveo
August 14, 2025
Well made, good finish. Got to be slightly careful when tightening since they are aluminum. Because they are aluminum, they are not designed to be weighted like other wheels that are brass made.
Isaac
August 1, 2025
These wheels were used on a custom fms k10 crew cab with fcx24 axles. I did have to drill the center hole out to make them fit, but i am very pleased with the outcome. I would buy again.
michael V
July 31, 2025
4 screws super easy to assemble fit every tire I have tried to use. I have 4 sets of these And they look great
Randy Munoz
July 20, 2025
I can't disassembled the wheels.. the small hex bolt are too tight from factory and are stripped so I can put tires on.. really bummed.
Devon
July 3, 2025
Looks very good. They weigh around 14 grams each. Only a gram or two lighter than R*4WD Steel wheels.
Nate
June 15, 2025
It is well made and has a nice scale look.
Khalifa Alboinen
June 4, 2025
These wheels look amazing and are easy to assemble. I have them on my FCX24 and they look amazing with the blazer body. You will have to drill them out and either get some wider hex extensions or some washers to shim them out for the FCX series trucks though. I’m sure they fit the SCX24 well.
Harper
May 14, 2025
I like these rims (and tires). I ordered the tires first thinking I could put them on my stock plastic rims that turned out to be a pain and I was gonna have to glue them so I ordered these rims. The first 2 out of the package went easy, remove the 4 little screws with a 0.5 put the tires on and reinstall the screws. The next screws on the next 2 rims were super tight. All 8 screw heads stripped 🤬 ended up using tiny needle nose pliers to grab the outside of the screw heads. After I got them out I had to use the needle nose to retighten them also. I like injora products and maybe I got rims from the new guy or something. Will be looking for a replacement screw set even tho I don’t plan on taking them apart I want to be prepared next time I order rims or something else.
Steveo
April 8, 2025
Well made, good finish. Got to be slightly careful when tightening since they are aluminum. Because they are aluminum, they are not designed to be weighted like other wheels that are brass made.
Isaac
April 4, 2025
These wheels were used on a custom fms k10 crew cab with fcx24 axles. I did have to drill the center hole out to make them fit, but i am very pleased with the outcome. I would buy again.
michael V
March 6, 2025
4 screws super easy to assemble fit every tire I have tried to use. I have 4 sets of these And they look great
Randy Munoz
February 23, 2025
I can't disassembled the wheels.. the small hex bolt are too tight from factory and are stripped so I can put tires on.. really bummed.
Devon
February 8, 2025
Looks very good. They weigh around 14 grams each. Only a gram or two lighter than R*4WD Steel wheels.
Recommended Products