Your cart is empty.
Your cart is empty. Compatible with Polaris 300 1994-1995, Big Boss 400 1994-1997, Big Boss 500 1998-2003, Diesel 455 1999-2001, Magnum 325 2000-2002, Magnum 330 2003-2005.
Compatible with Polaris Magnum 425 1995-1998, Magnum 500 1999-2003, Scrambler 400 1995-2002, Scrambler 500 1997-2012, Sport 400 1994-1999, Sportsman 400 1993-2014.
Compatible with Polaris Sportsman 450 2006-2007, Sportsman 500 1996-2010, Sportsman 570 2014-2015, Sportsman 600 2003-2005, Sportsman 700 2002-2007, Sportsman 800 2005-2014.
Compatible with Polaris Trail Blazer 250 1996-2006, Trail Blazer 330 2008-2013, Trail Boss 250 1993-1995, Trail Boss 325 2000-2002, Trail Boss 330 2003-2013, Worker 500 1999-2002.
Compatible with Polaris Xpedition 325/425 2000-2002, Xplorer 250 2000-2002, Xplorer 300 1996-1999, Xplorer 400L 1995-2002, Xpress 300 1996-1999, Xpress 400 1996-1997.
John Berkshire
2025-09-03 13:31:47
Had no problems! Fit solid. Easy to install on my 1996 Polaris Trailblazer 250. Seems to be good quality and great value. Not sure on durability due to just getting them installed. But I’m pleased. I took my time and still was done in 30 minutes total.
nj28sharp
2025-08-24 21:13:40
I recently replaced my Polaris ATP 500's front lower A-arm bushings with the MOTOKU set, and I'm blown away by the difference. The fit was perfect, installation was straightforward, and the results are incredible. My ATV handles like a dream now! No more wobbles or squeaks. If you're experiencing any issues with your ATV's front end, these bushings are a must-try.
Lisadavidson
2025-08-19 18:36:06
Item as described.
Sean Hamilton
2025-08-14 11:03:48
Worked great for my 2004 Scrambler 500. The metal collar isn't used for the 500's but will need it for the 400's.
Mr. R
2025-07-22 14:01:49
Fit perfectly on my 2000 Polaris 335 4X4. Took 30 minutes, start to finish, to change out both sides.
Jeremy
2025-07-08 11:24:53
a master cycle guy told me to take that junk back off and send it back the plastic bushings was tore up since they had to come off and emailed customer service with no response so i boxed them up started a return so now its a wait game update it's been 4 days and still no response from customer service don't waste your time buy somewhere else
Chris woods
2025-07-02 11:37:04
Worked great. Couldn't find this kit anywhere but here and Polaris. Way cheaper than polaris
AK Mud Man
2025-06-07 12:17:07
Upon opening the kit, it appeared well made. The shafts and bolts were plated and all hardware was suppied. The supplied shafts were within a couple of thousands to factory shafts, but the bushings were a very sloppy fit on either of the shafts. Since the replacement shafts were needed, I purchased factory bushings, which were not expensive. The factory shafts were $30 each. I would not recommend this kit based on the sloppy bushings for my 2003 Sportsman 700.
adrien
2025-06-06 14:15:12
bien ajustées
John Berkshire
2025-06-01 14:01:42
Had no problems! Fit solid. Easy to install on my 1996 Polaris Trailblazer 250. Seems to be good quality and great value. Not sure on durability due to just getting them installed. But I’m pleased. I took my time and still was done in 30 minutes total.
nj28sharp
2025-05-25 11:35:29
I recently replaced my Polaris ATP 500's front lower A-arm bushings with the MOTOKU set, and I'm blown away by the difference. The fit was perfect, installation was straightforward, and the results are incredible. My ATV handles like a dream now! No more wobbles or squeaks. If you're experiencing any issues with your ATV's front end, these bushings are a must-try.
Lisadavidson
2025-05-04 15:56:58
Item as described.
Sean Hamilton
2025-04-22 10:20:52
Worked great for my 2004 Scrambler 500. The metal collar isn't used for the 500's but will need it for the 400's.
Mr. R
2025-04-06 11:23:49
Fit perfectly on my 2000 Polaris 335 4X4. Took 30 minutes, start to finish, to change out both sides.
Jeremy
2025-03-15 11:18:06
a master cycle guy told me to take that junk back off and send it back the plastic bushings was tore up since they had to come off and emailed customer service with no response so i boxed them up started a return so now its a wait game update it's been 4 days and still no response from customer service don't waste your time buy somewhere else
Chris woods
2025-02-07 12:28:38
Worked great. Couldn't find this kit anywhere but here and Polaris. Way cheaper than polaris
AK Mud Man
2025-01-30 17:29:06
Upon opening the kit, it appeared well made. The shafts and bolts were plated and all hardware was suppied. The supplied shafts were within a couple of thousands to factory shafts, but the bushings were a very sloppy fit on either of the shafts. Since the replacement shafts were needed, I purchased factory bushings, which were not expensive. The factory shafts were $30 each. I would not recommend this kit based on the sloppy bushings for my 2003 Sportsman 700.
adrien
2025-01-26 10:37:23
bien ajustées
Recommended Products
$43.69
$ 20 .99 $20.99