Nano Bond Ceramic Coating 9H PRO, Car, Plastic, Glass, and Wheel Exterior Care Product kit, Hydrophobic, Long Lasting Professional Care, High Gloss Paint Shine, Automotive Polishing with Sio2, 30ML

I research everything before making a purchase, so when it came to ceramic coatings you can bet I did A LOT of reading watching YouTube reviews of all the popular products. In the past I've used a spray on/wipe off ceramic coating (Griots Garage 3-n-1) with good success; however, I wanted a "real" ceramic coating like the professionals use. So, I'll cut right to the chase...There is a YouTube channel called Scott HD where he tests 30+ products on a car hood (the hood is divided up into a grid of 30 squares). He applies all the different ceramic coatings, then leaves the hood (it's not on a car) out in the Texas sun. Every month or so he'll wash the hood and then show you how each product is holding up by spraying the hood with water so you can see the water repel.The most popular, and by popular I mean most advertised on Facebook, YouTube, etc., with tons of "positive reviews" (which I believe are made-up) turned out to be the WORST product. And you want to know which one was still holding up after 700+ days? Nano Bond!Prior to researching all the products, I had never heard of Nano Bond, so when I saw how well it performed, I figured it's going to be in the $150+ range like many of the others. I was SHOCKED to see that it's one of the LEAST expensive ceramic coatings you can buy.Applying was easy, but I would recommend you purchase a decent applicator sponge (I use Adam's, which you can get on Amazon). NB comes with an applicator sponge, but it's a bit too small for my liking. You get six in the bag, and since the sponge will turn rock hard the next day, you'll need to toss it in the garbage when finished...but that's ok because a bag of six is dirt cheap.Before you apply NB, you'll need to prep the car PRIOR, which involves a good wash, clay, and any paint correction needed (paint correction refers to a good buffing if the paint has swirls, scratches, etc.). I bought a clay mitt and was able to get the impurities that stick to paint off in about 10 minutes. Just cover the car in soap and wipe it down with the mitt (I use an MTM soap cannon to cover the car). Be warned: the bottle is made of thick plastic and it's heavy, so it gives the false illusion that there is a lot of product in the bottle - this is misleading and in my opinon, a bit of dishonesty. I finished my SUV and though I had a ton product remaining in the bottle, when truth be told it was literally empty when I finished. I bought two bottles, so luckily I was able to do my car as well (picture attached).When you apply it, you put about 10 drops on the applicator sponge and then apply (the bottle says 3-4 drops, but it's also a much smaller applicator sponge compared to Adam's sponge I used). Once the sponge is a used after doing a section or two, you only need to add 4-5 drops for each subsequent section. A little goes a LONG way! I did the same for my other cars and knocked each one out from start to finish in about 2 hours (that includes all the prep work).The end result is phenomenal! I got caught in the rain today in my Jeep and when driving, the water just blew right off the car! No dirt and no water spots when I got home. The shine is awesome!Don't waste $1000 for a "professional" to do it (unless your car needs a lot of paint correction and you don't have the time/tools/skills to fix it). Since my cars always look like new and I detail them a lot, neither needed any paint correction.

I recently purchased a new set of BBS wheels for an upcoming JDM car build I’ve decided to build. I love real sexy wheels but I don’t love cleaning them.I spent hours reading reviews and doing my own research on different ceramic coating products. My research kept bringing me back to this product and man an I glad it did! I applied this to a new set of BBS LM wheels. After the first wheel I was stunned at how amazing this made these already sexy wheels look! After applying this to all of the wheels and loving the results, I decided to then apply it to the lug nuts, aftermarket from grill and window visors. Once I do some paint correction on my car I will purchase another bottle of this and go to tow again! Great product, super clean way to apply and an unreal result! The fact that this will help prevent sun wear and help resist brake dust is a plus too. Hopefully the stated 3 year application interval will keep my wheels and other items I treated protected for years to come! Buy it now! You’ll thank me later!

Compared to professional coating products this one seems to be a steal. I lasts probably for at least 10 car applications. The resulting shine and longevity of the coating is average, despite thorough pre-washing and clay. The supplied foam applicator lasts about half a treatment before it disintegrates. Throw it away and use microfiber cloths.

I’ve applied ceramic coating before (different brands), but saw this and decided I’d put it on the wife’s new car. Being a new car, there was not a lot of prep to be done. You should always wash, clay bar and buff regardless of the condition of the paint and I did that. Usually prep is the longest and hardest part, in my case this time at least, it was the easy part. Applying took the longest, not because the product is hard to use, but because the car was white and if you don’t have the right light conditions, seeing the product flash can be a little difficult. But this is a pretty forgiving ceramic coating compared to most, 2-4 minutes and then buff/wipe it off. Even if it cured a little too much, I found it would still come off fairly easy. They send you a buffing towel, I suggest having a couple extra plush microfiber towels on hand, because even if your folding your towels into quarters, the product will still build up. But I’m a little OCD on detailing anyway so I always go through extra towels when detailing. I also helped my friend apply this to his 2017 black Z06 Corvette, which needed a lot of paint correction, and after hours, I told my friend he had two choices, start wet sanding and cutting or apply it. We got the paint as close to perfect as possible and I was afraid the ceramic coating would really show those areas that we didn’t get as perfect as I would have liked. But, it went on great and turned out beautifully! The car looked like glass. Most coatings will really bring the slightest imperfections to the top and make them very noticeable, so we either did better than I thought on the correction or this product is just that good! I have now done this to two cars and on my wife’s daily driver, this is still beading after three months. If I can get 6-12 months, for the price, I’ll buy it again. Overall for the novice, this is a great product!

Now keep in mind I try to use wax or coatings to keep my car decent every 6 months to 1 year. But I haven't tried an actual ceramic coating before. I did some research and found this is the best LONG TERM product that actually works. I did wash the car, removed anything with a clay bar, and let me say... at first I thought it wasn't doing anything until I passed over an area I already did for a double coat. That's when I knew it was working 🤣 I immediately noticed the difference in slip resistance. Covered the entire windshield and hood and the shine that thing gave was like a brand new coat of paint. Water rolled right off! Just clay bar and this ceramic coating. If it lasts... I'll be back 🫡

Definitivamente no es un producto premium, pero se muestra de mejor consistencia que los cerámicos económicos. Yo lo puse en un auto negro. Y luce bien. Ya veremos al paso del tiempo si funciona adecuadamente.

As long as you prepare your vehicle correctly with all the steps this product works extremely well. I used it last week took about 5 hours of waxing x2 , clay bar was then polish prep prior to nano bond. This product was easy to use on and off . Only use a couple of drops as directed and I did the entire car , glass, plastic and rims and used less than half a bottle. Beads well and great shine. I plan to use the rest of the bottle on my boat.I paid for my other vehicle to be done by a professional shop as they did PPF as well and honestly this product looks just as good for a fraction of the cost. I suspect it may not last the 5 years as the professional product but if I get 2-3 I am happy to redo it for the price.

This seems ok but quite expensive. It works into the body work well but after a month seems like the protection is gone.

Great value for money and easy DIY application.

I bought this a week or so ago for a bit of a project to start on. I had time this weekend so I ended up tackling this task. I washed my car with a ph balanced soap then did a clay bar treatment. I re washed it again with a new bucket of ph balanced soap. I did a very thin layer of polish around the car (step 1) treatment. After I dried everything off I started to use the ceramic coating. At first I didn't think I would have enough of the liquid because it felt like a few drops were not nearly enough and I thought I would have to keep applying drops to the cloth. I went in vertical stripes then did horizontal stripes in like a 3'x3' area each time then buffed out the haze. Once I was done I left it in the garage over night since it wasn't sunny out. Once I brought out my car today I was in absolute disbelief! The shine and the coating literally looks like ceramic! On top of that I still have about half a bottle to do another coat down the road maybe in a month. These pictures do it no justice. As long as you prep your car like I did I'm sure you will get the results you want! I will definitely recommend this product to anyone. Just remember it will probably take you a minimum of 6 hours to get to the stage of putting on the product but it was well worth the effort! Shine on guys!