Your cart is empty.
Your cart is empty.Product Description
National Hardware N215-566 4062BC Solid Flat in Plain Steel,1" x 72"
From the Manufacturer
Whether for home, farm, builder or industrial customers, National has all the right hardware in the sizes and finishes you need. With over a century of service National is committed to maintaining the highest level of product quality, innovation and manufacturing technology. Quality metal sheets and rod both threaded and smooth for all for your construction projects. Plain steel contract-it materials allow you to weld, form and fabricate easily because the steel is not treated with oil. The plain steel assortment includes angles, flats, sheets, sheet metal, channels, tubes and rods, rebar and squares, among others.
Brenda
September 3, 2025
I used this product to reinforce an older, budget toolbox that I'd picked up at auction because it was filled with good Starrett measuring tools. Not wanting to throw the tool box out, I subsequently replaced the failed and inadequate friction sliders with ball bearing drawer slides. This project required a little reinforcing of the drawers, hence the mild steel flat bar. I cut it into lengths to fit inside the drawer sides, then drilled and tapped directly into the steel bar (and backed up with a nut) to attach the new slides. Works a treat.
HYLAN ALSUP
August 23, 2025
This piece of steel is very hard and strong, Adapt to several different uses
Patrick
August 19, 2025
I need an inexpensive piece of steel that was 1 inch and they delivered!
sarah veltman
July 10, 2025
This is 1/8" thick, so a little thicker than in specs, and can be cut like butter with the right tools, so very easy to work with, and did the job it was intended for very well. The steel came in a ridiculously huge box, which could have been filled with 50 of these pieces of steel. If Amazon had put it in a rigid cardboard tube, it would have been far better protected and used far less cardboard in the process. Either way it came intact, no bending or damage.
Leslie Miller
June 26, 2025
worked for my needs - good price for this
Wild Moose
May 7, 2025
The bar was packaged well and arrived in a timely manner. It was exactly what I expected and needed.
Chris
April 8, 2025
This review is for a 4-foot long piece of steel, 1/8" thick and 3/4" wide. This was purchased to use as a diagonal brace for a ceiling mounted storage unit to increase overall stability. The ends were rounded over with a grinder and holes were drilled to fasten to the unit. The flat stock is exactly as described. I would purchase this again.
Nando
March 17, 2025
As expected
Gorden
March 13, 2025
Product arrived quickly, undamaged and seems to be great quality. I used it to make a new scraper bar for my snowblower.
Donat Labelle
February 26, 2025
Fair price
dave cardwell
February 16, 2025
Expensive buying this way but easier
Recommended Products
