Your cart is empty.
Your cart is empty.Product Description
gus stuecker
2025-08-07 18:15:11
Put this carb on my 2 sons dirt bikes and it brought them to life with no tunning or adjusting. Highly recommend for cheap dirt bike upgrade.
Talbert Bonafe
2025-07-17 18:10:29
I got this to replace the anemic carb on my 24' boom vader and It woke my bike up, I already removed the emissions crap but the bike was still being held back until I added the nibbi22 with flange, I opted to get the intake rube as well and I'm glad I did, started up right out the box, adjusted air fuel screw 1.5 turns out and the idle to 1500 rpm and it's great, no bog at regular speed or wide open, unless you try ro gun it from a stop but regular riding and spirited riding is so much better, the fit is good, just be careful with the angled filter as mine hit the forks and I damaged my filter, that's no fault of the product, you don't need a 26mm for a 135, I hears they are harder to tune on a 125 vader, ssr etc, you will be better with the 22mm, looks awesome, wasn't damaged during shipping or otherwise.
Sebastian Sotelo
2025-07-08 16:02:26
i have this carb installed on my 212 and it’s super easy to tune nice quality and it works great i recommend it!
Customer
2025-06-30 16:41:16
Removing the original factory Coleman B200 carb was harder than installing the Nibbi, did need to replace the throttle cable, and that was very easy. After installing pulled start coil, started immediately! Little throttle adjustment needed because it was 15 degrees, but runs like a champ and easily adjustable. I used the Nibbi stock setup, I did not use the other jets that were included. Throttle now is INSTANT with nice torque. I highly recommend if you want to improve and upgrade from a factory carb with linkage, springs, and screws(those all are eliminated with the Nibbi). Honestly stop wasting time and looking at those cheaper ones.
Customer
2025-06-22 21:59:58
Super easy install. Easy to tune but it was a little hard finding info on correct jet size for altitude. Also had to turn the intake manifold 180 degrees to get it to fit on my tao 125 atv. It's larger than the stock carburetor. It looks really nice and it's a quality part. 35/108 jets work perfect for me at 300asl. Had to order them separately but more pep is worth the $10.
Nicholas C.
2025-06-07 17:12:18
I'm a top tech working on cars/bikes/equipment for 30+ years. Looks the business but it's garbage. My bike has a midrange lean spot. It needs a larger jet needle. Looking on their website they'll sell you a needle 4 pack. Unfortunately they're all the same size needle and not a tuning kit with different needles. Why? Because they don't make different size needles for them! That's some pretty shady stuff considering a needle isn't really something that wears out that you'll need four of them. There is no way to tune these carbs properly like a Mikuni. If it works on you bike you're either kidding yourself or you got lucky. The only reason this made my bike faster is because now my wallet is lighter.
HS
2025-05-17 18:00:56
I’ve used Nibbi Carbs two times, and so far they don’t dissapoint! I installed this PE17 on a 90cc 2017 dvx quad, and a PE22 on a SSR125, the SSR gained 10mph, and the quad hits its rev limiter at top speed now
Erek Kahl
2025-05-05 10:27:55
Very good set. Came with extra jets.
Paolo
2025-02-27 16:53:53
Not great carb don’t recommd it
Olivier Gagnon
2025-02-21 10:08:38
I had carb problems with a GPX Pitster Pro XJR 125, bought this carb, installed it in 10 minutes, it runs better than ever now ! I only adjusted the idle and air screw, the stock jetting is perfect already ! Only negative, the air filter is a bit big for my application and sticks out a bit too far… Easy to install, good quality, awesome buy, I definitely recommend !
Alfredo Duran Burgos
2025-02-04 13:57:39
4 de 5 Por que: El carburador funciona y se ajusta fácilmente, pero el filtro de alto flujo que viene en el kit lo sentà un poco grande a la hora de instalarlo, termine poniéndole otro filtro nibbi de 45 mm y ajusto a la perfección...
Tyler
2025-01-31 14:14:15
Works great on my Apollo 110Ccc. Bolted right up, the throttle cable fits fine, and started on the 2nd kick. Only thing I had to change was the needle position, and the float height slightly to make it snappier on throttle.
Recommended Products