Your cart is empty.
Your cart is empty.
Description
The LIS3DSH is an ultra-low-power highperformance three-axis linear accelerometer belonging to the “nano” family with an embedded state machine that can be programmed to implement autonomous applications.
The LIS3DSH has dynamically selectable full scales of ±2g ±4g ±6g ±8g ±16g and is capable of measuring accelerations with output data rates from 3.125 Hz to 1.6 kHz.
The self-test capability allows the user to check the functioning of the sensor in the final application.
The device can be configured to generate interrupt signals activated by user-defined motion patterns.
The LIS3DSH has an integrated first-in, first-out (FIFO) buffer allowing the user to store data in order to limit intervention by the host processor.
Features
Wide supply voltage, 1.71 V to 3.6 V
Independent IOs supply (1.8 V) and supply voltage compatible
Ultra-low power consumption ±2g ±4g ±6g ±8g ±16g dynamically selectable full scale
I2C/SPI digital output interface
16-bit data output
Programmable embedded state machines
Embedded temperature sensor
Embedded self-test
Embedded FIFO
10000 g high shock survivability
Applications
Motion-controlled user interface
Gaming and virtual reality
Pedometers
Intelligent power saving for handheld devices
Display orientation
Click/double-click recognition
Impact recognition and logging
Vibration monitoring and compensation
Package Included:
1pcs NOYITO LIS3DSH Three-axis Accelerometer Module
R Mike
2025-01-14 15:03:56
First one arrived without a chip, just a blank spot on the board where the chip should be. Sent it back for a replacement, new one arrived with LIS3DH chip installed, which is not LIS3DSH as advertised. The markings on the exterior of the chip match the -3H, and the WHO_AM_I register reports 0x33, the code for LIS3DH.LIS3DH and LIS3DSH are different chips - they're functionally similar, but they're not compatible at the software level (different register sets), and they have different specs. Those looking for LIS3DSH, which might be required if that's what your software calls for, or could just be preferable because of its better specs, need to look elsewhere - this isn't it. The seller is misrepresenting a LIS3DH as a LIS3DSH.
Recommended Products
