Your cart is empty.
Your cart is empty.Rotary Table 3 Inch - 75mm Horizontal & Vertical Model. Base Dimensions: 4. 1/8" x 3. 1/4" 4 T-Slots: 5/16" - Vertical Height - 1-5/8 Inch. Table Scale is Calibrated in 5 degree increment. Can be used both in horizontal & vertical position. Gear Ratio - 36:1, which basically means that the 1 rotation of the handle shall rotate the table by 10 degrees. Free - T Slot Cleaner With Table. Boxed Packed.
Steve
2025-08-28 13:17:20
This little table is perfect for the type of work I do. Very accurate, small amount of backlash. I've had more high priced ones over the years in school shops, this one compares. Not made for big jobs, but works well for small work.
Just Another
2025-06-30 10:08:03
Like other rotary tables of this size, the accuracy isn't as high as some bigger models. Note that the holes for clamping to your surface may not match a given mill, which I fixed with a custom made tnut (larger nut, smaller threaded hole) and by anchoring the rotary table to a slotted angle plate when bolting it at right angles to the ways.
andres ortiz
2025-05-11 12:44:43
I took the table out of the box and turned the handle, and it bound up a bit once per rotation. opened it up and found metal shavings, cleaned it all out and re-greased it. noticed the ends of the screws had thin pieces of metal bent into the grooves, cleaned up the end faces with a lathe and filed away the thin ledge. the indicator dial wasn't laying flat against the plate it pushes against, so back on the lathe with that too to get it to sit flat. Then I noticed when one of the 2 bolts on the plate behind the dial was tightened up, the binding got worse. I tightened the other bolt up and lightly tightened the offending bolt with the help of a spring washer. After all of this I took my drill and ran it for a few minutes at a few hundred rpm to wear everything into place, now it all turns smooth as silk. The pieces are all there for what you need, and if you don't mind it feeling ugly when you turn it it'll work as is. but the assembly quality isn't great.
NIKOLOZ N/A NAREKLISHVILI
2025-04-07 15:21:19
good
Grendel
2025-04-06 12:39:10
A little rough around the edges, but much more accurate than I expected. Happy with it so far.
Larry Colombo
2025-02-21 17:05:48
Not super precise but serves its purpose. Excellent for the price.
Robert E.
2025-01-08 13:28:01
Delivered Quickly and works as intended.
Joe Rudy
2024-12-30 10:57:40
I was quite surprised on the quality. I've used it a few times and have no complaints.
Recommended Products
