Your cart is empty.
Your cart is empty.Our KS7190 Single-X Keyboard Stand provides a wide, stable base and slip-free support for small-format keyboards. This versatile stand adjusts in height and length to suit various keyboard sizes and playing styles and features adjustable nonslip arm sleeves to accommodate a variety of keyboard widths. The entire stand folds flat for convenient storage and transportation.
Reviewer
2025-08-20 15:54:45
I put my cumbersome Yamaha YPG-235 on this for use at home. The stand is plenty sturdy, at least on my floors, and adjusts to the right height for me (I am short). Make sure you read the assembly instructions carefully, because assembling it isn't what I would describe as intuitive. It is very easy to put one of the pieces on wrong and end up with a wobbly stand.Note that the screws come screwed into the ends of the legs, so if you're having trouble locating the screws, look there. My only problem with assembling this is that one of the screws was in the leg so tight that I had to whack the included hex key with a hammer in order to loosen the screw. However, aside from that, it went together easily and was fully operational within a few minutes.
M. Hill
2025-08-17 17:25:14
I needed a stand for a 76 key Yamaha keyboard that weighs under 15 pounds and this On-Stage X model popped up during an internet search. I am not a professional hauling it to gigs, but I appreciate that it is portable and collapses for storage. The stand has a weight capacity of 90 pounds. There are five height adjustments from 27 to 38 inches easily attained by using the pull knob to release and then secure the pin into one of the holes in the disk. I did this without the keyboard in place.Assembly is simple, the X section is already in one-piece so just the bottom and top arms need to be attached to it using the included Allen wrench. The wrench is stored on a square shaped washer that fits over one of the legs so it is always nearby whenever needed. The screws are partially attached in the end of each leg, so use the wrench to remove, position the proper arm in the correct direction, replace the screw and use the wrench to secure in place.It is wise to look at the instructions because although basic, assembly is not intuitive. First face the X with the height-adjustment knob facing forward (toward the player.) Then attach the arms but note both the longer bottom arms that rest on the floor along with the shorter arms that support the keyboard have a long and short side. .For structural stability the bottom arms should be installed with the short side facing the player and the top arms should have the short side away from the player, behind the keyboard. Then the keyboard simply rests on the rubbery sleeves on the ends of the top arms, and although my initial placement was wobbly, I moved it until it was level and it is doing an excellent job supporting the instrument. Parts are available on the website. Page down on the lower right side under support and have the stand’s model number handy to locate parts quickly. An economical and functional solution.
Alexander
2025-08-07 09:36:22
This stand took less than 5 minutes to assemble. I don't remember if it came with instructions, but I just used the picture on the box and some common sense and it was a piece of cake to assemble. I got my keyboard on (as a fellow reviewer wrote, you have to move the rubber knobs accordingly to help secure your keyboard to the stand. It comes with an allen wrench and another tool to help with the assembly.I will say that if you use the keyboard stand on carpeting it may be a little wobbly, but this is only under intense playing, and even then it really doesn't wobble too much....if you are using it on wooden flooring I can't imagine this to be a problem at all. The stand is very sturdy and looks great next to all my other equipment.5/5
f2x
2025-07-27 15:44:55
I mean, it's a cheap keyboard stand. It's easy to assemble, sturdy, portable, and does the job. What more did you want?Oh... Fair warning: Never try to adjust the stand height with a keyboard on it. It *WILL* go very badly no matter how careful or capable you think you are.
Justin Radano
2025-07-09 12:07:01
Like the title alludes, this is a classic must-have piece for any keyboard player.Whether you're practicing in a basement/garage, or playing a concert on a main stage, this stand gets the job done. Not only is easy to put together, but it's also light, and easily compact-able, and that's essential when you're on-the-go as most gigging musicians are. This stand even survived falling out of the back of a pickup truck, which is saying something, considering my last stand didn't survive falling off a 2-foot riser.I must admit, when I purchased this I needed something in a hurry and this was the only stand that was compatible with my Amazon Prime trial. Let's just say I figured I'd end up saying, "Oh well, you get what you pay for," but this stand survived all the show's I had booked this winter, and I'm still using it. So in the end, with this stand you get more than what you pay for, because this thing's dirt cheap too.
christopher whitehead
2025-07-04 10:29:04
great product
Lola B. Collie
2025-06-21 16:17:50
I ordered one of these because of the inexpensive price for my ekeyboard which I use mainly at home. When the box arrived, there were parts missing. I immediatly contacted the company, and within 24 hours they shipped me a new product. Very nice person I dealt with in Customer Service. The second delivery was in perfect condition, no missing parts, easy to assemble and works great. Highly recommend this product and this company.
Ashley
2025-06-06 16:56:43
Came with everything but the needed screws to actually put together. Instead I got some silver screw tighter that not even listed on the instructions list.
Payet
2025-06-04 13:56:19
Conforme à la description
Am C
2025-06-02 16:42:30
Very affordable and it’s easy to adjust for height. Good and sturdy. Came with easy to follow instructions and the tool needed.
Ale Leyva
2025-04-05 20:12:05
Llegó en un dÃa, de lunes a martes. Es super fácil de ensamblar, llegó con todas las piezas. El instructivo está en inglés pero es suficiente con las imágenes para armarlo. Aguanta muy bien mi Casio y para lo que costó está muy bien, porque es muy práctico. Para mà es útil porque pienso dejarlo en un lugar fijo.
Balu
2025-03-26 12:09:15
Good product
G B.
2024-12-19 12:28:41
Despite being a lightweight stand it is still sturdy and solid - my keyboard weighs 25lb but the still feels steady safe and secure. I particularly liked the locking mechanism, which was very positive so no danger of a collapse. I did have a minor problem putting it up. The instructions do not designate an orientation but my first attempt resulted in a wobbly stand. So I changed the pieces round and was rewarded with this lightweight but steady stand. Am very pleased. Now whether the orientation matters or whether my first attempt was not seated correctly, I do not know but all is well now.
Recommended Products
