Your cart is empty.
Your cart is empty.Jacob Garza
2025-08-22 10:47:08
Put on my Step-Daughters 2008 Nissan Altima and the struts fit perfect out of the box. Had a knock initially but that was because when I adjusted the shock mount to line up the holes, the shock tension loosened. Once I adjusted it, the knocking went away and the ride is smooth.
Meh
2025-08-18 14:23:01
Installed on 2010 Altima.These were simple enough to install and came with decent instructions. Couple of tips: The upper part may not be aligned with the lower mounting brackets. Not a big deal. There's a notch in the top so it can only be installed one way. Simply install the top first then spin the bottom around to proper placement. Easy peasy.The brake line retaining clips were kind of a pain to get back on. You just need to work at it. IF they bend just bend them back into shape and start over. Other than that, happy with this purchase.
Sammie
2025-08-03 12:45:15
Perfect fit for my 2007 Altima. No fitment issues or nothing, perfect swap.
Simon Manser
2025-07-08 11:49:22
Fot perfect and installed easily, but cannot really rate the product 2 weeks after installation. How long do they last? Do they squeak?I won't know for a while, so its not fair to the consumers to rate something so quickly
Carlos a.
2025-04-28 12:46:34
Easy to installValue for your money
Jon Tabone
2025-04-27 10:52:37
After installing both sides, there was an awful grinding and rubbing noise that was almost impossible to narrow down. There is a bit of a size difference in these struts which caused them to rub and grind on my alloy wheels. I changed bearings and a cv axle before I finally found the issue. The drivers side strut top nut was not tight at all. I added a washer like another user suggested. Just kind of frustrated with the lack of craftsmanship in products I have recently purchased.
suezque
2025-03-24 12:50:42
Easy to install! Cost saver. Tip: Make sure you have upper arm strength! and another pair of eyes. It was a hoot trying to have it turned properly when guiding it thru the placement holes. (and get some Pro Blaster! Those original bolts are a bugger to get off!) .
Baiyina Abdullah
2025-02-10 17:53:33
We received this item before we were expecting it. It was packaged great and everything was in there. It was very easy to install.
Recommended Products