Your cart is empty.
Your cart is empty.Product Description
Floyd Mc
August 2, 2025
Works as it should. As far as leaking. Un treated Pipe threads leak it's what they do. Get yourself some PTFE thread sealant, put a dab on the threads and put back together. This tool will work just fine.
Michael Gallegos
July 25, 2025
Works perfectly
Dillon
June 5, 2025
Used these attachments on a couple different grease guns. The seals seem to have started failing but overall everything in the kit works.
TJ Katz
June 3, 2025
Nice kit which met my needs for a short time until the cast aluminum shattered.I have regular maintenance requirements on my equipment and would have saved money buying a better built (and much more expensive) unit in the first place.This kit will work fine if limited use is expected.
Christina Bovee
May 31, 2025
Sturdy little case. A bunch of handy attachments for hard to reach areas. Easy to change between couplers. Happy with purchase.
Frank A.
May 27, 2025
As advertised
Paul B.
May 13, 2025
I use it for greasing the various grease zerks on my tractor
Customer
April 19, 2025
After reading previous comments about leaking. I tightened all the fittings (they were very loose) and for the most part I had no problems except for the 16mm right angle adapter. The zerk was deformed in the adaptor causing the leaking. I replaced that zerk (metric threads) and it works like is should. For the price and a couple minutes to tighten the fittings it works great.
Jon C.
March 26, 2025
If you have any sort of ATV, UTV, trailer or machine that needs greasing, this kit is very handy. Items are good quality and fit most situations. A+++
Greg
February 18, 2025
Lots of attachments for the price. The joints leak out of the case. Tightened up but one still leaked a bit. Teflon tape will solve it. Not sure why it doesn’t come already done but I would recommend pre doing all the threaded joints.
Samuel
February 15, 2025
Decent kit with a good selection of adapters the heads are lcokable/adjustable for those worn down zirks that never usually seal but they aren't the most durable couplers. I actually had one grenade the head on me when trying to push grease though a seized fitting. They also leak out the threads occasionally meaning they benefit from some pipe dope or Teflon tape but that makes hot swapping the heads a bigger challenge. Still decent for the price and gets the job done when you need to get into a tough spot but I would not daily drive the straight fittings in this kit.
Luc Deschenes
January 15, 2025
Vas très bien coffre très pratique
MattyBoBatty
January 2, 2025
The grease leaks out of all joints. More grease ends up on the outside of your joint than inside. Not to mention the tips fall apart.
Recommended Products