Shopping Cart

Your cart is empty.

Your cart is empty.

Slippery Pete Mini Pistol Grip Grease Gun. Heavy Duty Design for 3oz Cartridges. 12 inch Flexible Hose and 5 inch Rigid Extension Pipe

Free shipping on orders over $29.99

$28.49

$ 13 .99 $13.99

In Stock
  • 🚜12 Inch flex hose to grease HARD TO REACH FITTINGS
  • πŸš— BALLOON PLUNGER TECHNOLOGY to empty grease cartridge
  • 🚜EASILY CRANKS UP TO 3000 PSI (See Picture # 3)
  • πŸš—MINI DESIGN IDEAL FOR TIGHT SPACES
  • 🚜 Heavy Duty Steel Construction



Product Description

slippery pete
mini grease gun riding lawn mower atv 3 oz ounce small coupler
grease gun

slippery pete

Pumps up to 3000 PSI

Cranks up to 3000 PSI, no problem! 500 PSI should be enough for your standard Zerk Fitting.

slippery pete

Easily Eliminates Air Pockets

Unscrew barrel 1 full turn, then with plunger rod pulled back, twist T-handle 1/4 turn to engage with plunger. Then push plunger towards the head of the grease gun to force out air pockets. Finally twist T-handle 1/4 turn again to disengage plunger rod, push plunger rod back into barrel, and re-tighten barrel.

slippery pete

Flexible Hose for Tight Spots

12" flexible extension hose allows you to grease hard-to-reach places without breaking a sweat.

slippery pete

Nicholas Mancini
June 12, 2025
Easily fit a Polaris 3oz grease tube. Had no issues loading the gun and greasing my ride.
Mike Loomis
June 9, 2025
Product is easy to load and pumps properly. The two end attachment make it versatile for different applications
George Blue
May 25, 2025
I really liked this little grease gun. I've never used this size before but it worked great and loading the grease cartridge was easy.
E B Farnum
May 20, 2025
I watched a video before using this grease gun on my lawn tractor. Well worth the time! I did have somewhat of a problem removing the empty cartridge but that was most likely due to the limited use of my hands due to a heath condition! I have seven locations that needs greasing on my Deere lawn tractor and I believe it used more than half of the mini cartridge!
foxmountain
May 14, 2025
Excellent grease gun for tight spots! Very pleased with my purchase.
RRS
April 21, 2025
The chuck on this gun must be loosened to let go of the zerk fitting. I'm talking about the collar/nut at the very end where the zerk fitting is inserted. If you leave it fully screwed on, you can push it onto the zerk but you'll never get it off. I had to loosen the nut to almost coming off to get it off the zerk fitting. This can be good and bad depending on your pov. The good is it really holds on and won't come off. The bad is you have to loosen the nut to get it off. But overall the gun works well and this is probably a minor issue for most. BUT - if you don't know this and you slip it onto a zerk in a confined area with the end-nut fully tight, you may not even be able to get a wrench in there to loosen the nut and remove the chuck (this almost happened to me) - then you're really in a pickle.I have another (full-size) grease gun (different brand) that has a slightly different chuck and it pushes on and comes off without *any* adjusting of the end-nut.
Mudhead
February 16, 2025
I learned a long time ago as a School Psychologist that many Teachers did not know or understand how to give explicit instructions to their students toward helping them succeed better in the classroom and prevent needless failures. Let me tell you, reading and executing the instructions on how to load and activate this Grease Gun is a lesson in how to waste 1/3 to 2/3 of the grease (which was expelled on my garage floor). That just about doubled my purchase price and aggravated the heck out of an honest customer. Good, understandable, foolproof instructions are very difficult, but not impossible to write. SP Mini Grease Gun could and should do a MUCH better job, but they apparently don't care enough to put someone in that job who knows how to write in the English language well enough for the average novice to prevent the disaster that I experienced.
J-ray
February 14, 2025
I like that the plunger rod of this 3 oz. gun can be pulled back & locked in place (like the old ones were, and some still are). I like that both the front and rear heads unscrew and can be removed which can be helpful in removing an empty cartridge. I like that the zerk fitting can be opened slightly (be careful not to unscrew it too far as the tiny grippers can fall out; don't ask how I know this), then retightened onto the zerk being lubed. This eliminates grease from squirting outside the fitting rather than into it.
Recommended Products

$176.00

$ 79 .99 $79.99

4.3
Select Option

$41.99

$ 21 .99 $21.99

4.3
Select Option