Your cart is empty.
Your cart is empty.Jeep moved the exhaust forward on the 2012 Wrangler. Unfortunately, on Jeeps with 2.5-Inches or more of suspension lift that means their front driveshaft is liable to make contact with the exhaust y-pipe, melting the CV Boot and causing the driveshaft to fail prematurely. This exhaust spacer kit from Outland automotive fits 3.6L equipped Wrangler models, helping move the y-pipe further back and increases the amount of front suspension travel from 2.5 to over 5.5, thus saving your driveshaft. The spacers install on the flanges between the front Headers and y-pipe.. the great thing is the kit is easy to install and does not require permanent modification to the exhaust. Hardware included.
sandra
2025-08-21 12:00:10
The hardest part is loosening the clamp on exhaust to slide it deeper into the adjoining pipe. Don't forget to remove/break off the positioning rivet.
Scott
2025-08-08 15:38:21
Worked as intended. Some reviews said the bolts were the wrong length. I did not have this problem.
Shade
2025-07-25 19:23:44
Had them on for months and still holding up!
407Lou
2025-07-21 17:33:53
So if you think you are getting anything other than a Rugged Ridge product, think again, Outland is just selling Rugged Ridge spacers at a higher price, nice. And yes, as the other reviews for RR have stated, the bolts are too long, specifically the longer bolts used on the longer spacer on the passenger side. They are too long and do not hold the spacer in place. It would be nice if Outland can give you the correct length bolts if they are going to charge you more. A simpler solution would be to give you bolts with threads all the way down instead of threads at the tip, then you wouldn't have a problem with them being a little long.So once you go buy some shorter bolts, the spacers work just fine. But good luck getting the driver side spacer in, that one was a real pain. BTW 80mm bolts (M8) will work for the passenger side.
mike
2025-05-19 10:49:37
Gave a 4, not because of quality, but not sure if it actually does anything. It did move the exhaust back, but not sure if its actually gonna keep the drive shaft from hitting in extreme flex.
Erik Henry
2025-05-16 13:36:48
Worked great
Austin Ferris
2025-03-25 14:57:31
Stainless steel
Thomas Hallenius
2025-03-12 14:06:13
It was mildly easy to install, some of the instructions need to be explained more
Patrick Longmire
2025-02-21 11:16:53
Fit prefect. Very easy to install. After i got the broken bolts out.
Nigel corbett
2025-01-31 18:58:23
Perfect fit and has awesome hardware
Recommended Products
$258.00
$ 99 .00 $99.00
$399.95
$ 99 .00 $99.00
$282.00
$ 99 .00 $99.00