Your cart is empty.
Your cart is empty.The high quality Packard Blower Wheel (A65569BW ) attaches to the drive motor shaft. The Blower Wheel blows air through the drum and out through the exhaust vent and replaces A65569BW. Please be aware that it is recommended to use saftey equipment and to disconnect the appliance from all utilities prior to any service or repair. Please refer to your owners manual to confirm part numbers and for instructions as some repairs require a trained service professional to complete.
T. Victor
July 20, 2025
This item is an exact replacement for the Carrier LA11AA005 inducer fan wheel. It is of the same high quality as the original - the galvanized finish is evenly applied and the fan ran smoothly when installed. Compared side by side with the original, it could have been made by the same company (but there is no indication where this part was made). Even though I got the original fan off without much trouble, I put this fan on anyway with a dab of anti-seize grease on the set screw threads in case I ever need to repair the inducer motor section again.
Easycool
June 22, 2025
Even though this item came days ahead of schedule and no evidence of damage was observed, it required truing for it to function properly. Otherwise significant wobbling occurred.
A
May 22, 2025
fits nice, works well
Britt C.
May 13, 2025
I ordered this because others stated that when they were trying to replace the motor on their furnace, they damaged this wheel. Turned out we were able to replace the motor without an damage to this piece, so I have it as a spare now.
Vagan
May 4, 2025
the disc is poorly balanced. in one word, the product is terrible.
Ian C. Armstrong
April 26, 2025
This wheel is the same wheel from the forced air heating unit I repaired. I was able to re-use the old one but I kept it anyway as it is obviously the same size and I have 3 additional units that will eventually break. Can not imagine the price from a old school parts supplier. Good part.
Steadypimpin
March 31, 2025
This wheel is 4"x4"x2". I'm sure it's a great wheel but it wasn't the size I needed.
A Crowe
March 19, 2025
good. Perhaps could be more clear on the size. Did not realize this was a small 3' diameter wheel in listing. I didn't read it carefully
Lan Chen
February 23, 2025
Perfectly fit. Price is ok.
Patrick lozinski
January 30, 2025
No problem
JD
January 11, 2025
I ordered sdpare parts for Carrier Furnance 58-STA-135,Inducer Motor wheel is is oversized, can not slide in the housing .Motror shaft is not long enough. Real disaster.
Customer
January 10, 2025
Exact fit, easy to bend out of shape
Recommended Products
