Your cart is empty.
Your cart is empty. How to use it:
1. Put the gasket into the connector, confirm whether the intake valve and release valve are closed, and turn the pin switch of the small cylinder adapter to the top.
2. Connect the large carbon dioxide tank.
3. Connect the small paintball co2 cylinder.
4. Turn the pin switch of the adapter to the bottom to fully open the cylinder valve.
5. Open the intake valve (the first valve from the large water tank, not the large water tank handwheel).
6. Easily open your big tank handwheel and listen to a little one. When you pinch it, open it a bit until it keeps open. Wait about 30-60 seconds until you hear no gas flow and filling can be completed.
7. After filling, turn the handwheel to stop the carbon dioxide.
8. Turn the pin switch to the top to isolate the paintball cylinder.
9. Open the escape valve to release residual gas.
10. Remove the small cylinder.
Marc B.
2025-09-01 18:28:40
this is a good unit hose is quality connections are solid valve is good.I use it for transfering to my 20oz tanks from a #20lb co2 tank.It can be used for filling other tanks as well.
B. Arnold
2025-08-11 13:01:01
Works good, seals good to the big tank. Put the little guys in the freezer overnight and you can watch the frost go away as ya fill them with liquid CO2. My XL-18 has never been happier. LOL
Tony Brooks
2025-06-12 10:18:47
so far works pretty good, no problems
Customer
2025-04-28 18:57:30
Refill station was affordable and worked like a champ. Easy to use and store
Robin.
2025-04-10 17:22:33
Económico
Adolfo
2025-04-07 12:19:48
It is good quality
Jacob
2025-04-03 18:21:57
Works if youve got a tank with the drop tube, if not youve gotta invert the tank.
Shawn Cross
2025-02-22 12:36:40
Exactly what I needed and it works perfectly
brian ritchie
2025-02-20 14:28:20
Instructions would be incredibly helpful.
Recommended Products
$49.99
$ 24 .99 $24.99
$32.95
$ 16 .99 $16.99