Your cart is empty.
Your cart is empty.Product Description
- The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.
Performance Parts V80 Cylinder Body Kit for 66cc/80cc
- Performance V80 cylinder body with 47mm bore
- Material of cylinder: steel and iron
- Performance reed valve with OD 19mm intake, Muffler Stud Spacing 40mm
- Windowed piston, Excluding piston pin and clips
-
Performance Parts V80 Cylinder Body Kit for 66cc/80cc
86mm, picture showed
64mm, picture showed
Out Diameter of intake: 19mm
Intake stud spacing 40mm
Intake stud spacing 40mm
Mufflter Stud Spacing 40mm
Windowed Piston, Excluding piston pin and clips
Out Diameter of Piston: 47mm
Piston Kit include: 1pc Piston, 2pcs Piston Rings, Excluding piston pin and clips
Requires for piston pin with out diameter 10mm
Carbon Fiber Block inside of cylinder
Carbon Fiber Block inside of cylinder make more power
Cylinder Size
V80 Cylinder Bore and Stoke 47mmx40mm
Intake Stud Spacing: 40mm
Muffler Stud Spacing: 40mm
V80 V100 Correct Installation Way
For reference only
Sean gray
2025-07-29 10:15:35
It's a nice setup but I had the drill the adapter and my head to fit.runs perfect so far
Charlene Lull
2025-07-21 15:38:33
Don’t just don’t they send you this trash got my broken like really broken came out the box in really bad shape and a manufactures just painted over the part that was broken off. Also, the kit was missing parts and false advertisement does not fit 80 cc at all it worst then trash I have found things that came out of a junkyard better than this what they sent me
John B
2025-07-02 11:22:58
sad to see other customers kits were very poor quality, i got lucky and received a halfway decent kit. not to scare new builders but you get what you paid for i have to do extensive port work and clean up to get the preformance i wanted out of this iron block. unless you are an experienced builder and has ported before and is also willing to take a gamble at it for fun i would not recommend this. i rose my exaust port and when i was doing port work i found a ton for casting sand in the transfers had to clean that up, if you want some info about the port work of followed got check out the yt channel "Kensters Bikes and things" he did a great job on the port work. another thing i want to address is the piston, just buy a low hole piston and window it yourself, the kits piston is terrible quality. i was able to reach 13k rpm with a pipe, balanced crank, tuned pwk 19, custom windowed piston, and a better head. hope this helped anyone out.
DU5
2025-06-23 10:22:34
Not very good quality I ordered two of these 1 of the 70s and 1 of the 80s the 70 I took out the box and put it together and within 2 min of starting it one of the rings broke.....the rings and even the piston are questionable after that One of the reed valves snapped off ...(.yes I used the proper mix of gas ) the cylinder out of the box has a cracked skirt kind of hard to see in picture but it's all the way through.. the transfer port walls are different thickness one side is like razer thin it could just be I got a bad one but all in all after getting a different piston and taking the reed valves off the 80 it makes decent power
M. C.
2025-06-08 13:37:00
The media could not be loaded.
Jack
2025-05-25 10:42:19
They did a good job casting clean! Ports are also
Alvaro Jimenez
2025-01-20 11:50:03
It will most likely not slap on as you may have to grind the base to fit it. But works great, makes a night and day difference compared to the old 66cc jug. Would highly recommend if you're not afraid to tinker with it
Johnny Bibbins
2024-12-12 10:17:54
Cam damage at last week
Recommended Products
$49.77
$ 24 .99 $24.99
$199.99
$ 82 .99 $82.99
$308.89
$ 99 .00 $99.00
$29.99
$ 13 .99 $13.99