Your cart is empty.
Your cart is empty.Product Description
PERLESMITH Universal TV Stand for 19-43 inch TVs
KB
2025-08-25 10:34:36
This stand is exactly what I needed. Even though I couldn't find any reviews or specs that specifically said so, this stand allows you to go quite low. I have an overhanging shelf that I needed to fit a new 50" TV into. The feet the TV shipped with caused it to be too tall and of course, there's no ability to swivel.I found this stand and even though I wasn't sure it would be low enough, I gave it a try. It's perfect, it allows me to have the TV a couple inches above the foot and it fits under the shelf with no issue. It's also a simple design and the instructions make it easy to choose which hardware to select to mount the plate to the back of the TV. It swivel nicely and is quite sturdy. I'm very happy.
Poquonock
2025-08-15 10:32:14
I bought this to replace the legs that came with a 32-inch Roku-Sharp flat screen TV with VESA mounting holes in a 200mm square. It was easy to assemble, with clear directions and a complete set of hardware including multiple bolts and spacers to fit different screens. It is quite sturdy, has a clean, simple appearance, and appears solid enough to accommodate a somewhat larger, heavier screen. There are three mounting heights to accommodate different locations of the holes on the back of the TV or monitor and screen size. (I used the top slot and my TV has about six inches of clearance from the bottom of the bezel to the table top.) Once attached, the screen has few degrees of side-to-side pivot, but beyond that it is fixed - it does not tilt and once the bracket is attached to the stand it is solidly bolted in place. This stand met my needs perfectly and inexpensively.
Peter
2025-07-30 10:26:33
I used to install TVs for people professionally, so I have used many different mounting systems. I was looking for something cheap, but reliable to hang a 50" LG 50LA6200 LCD TV. I looked at a lot of options both on Amazon as well as elsewhere before settling in this one. I am happy that I did!For starters, this comes with EVERYTHING that you could possible need to hang your TV, with the exception of a #2 phillips head screwdriver and a drill. Included are a complete assortment of screws, bolts and washers (all neatly organized and labeled in individual packets), a double-sided spanner wrench, a very nice magnetic level, and even a 10' HDMI cable. The instructions say to use the "optional" expansion kit for larger TVs. Usually, this is code for "kit not included." I was pleasantly surprised to find that that was not the case here. For once, the "optional" kit was actually included!Installation was a breeze for me, even without instructions since I already know how this works, but I found the instructions relatively easy to follow for those who need them. All of the various configurations for the expansion arms can get confusing, but just try each one until you find the right setup for your TV.** PLEASE NOTE **There is one change to the instructions that I highly suggest, however. The instructions say to drill a 7/32" pilot hole into the stud for each mounting bolt. Then screw the bolt in with a phillips head screwdriver. When I first mounted this (I wound up moving it shortly thereafter), I followed the suggestions for the pilot hole. Sure enough the screw did thread in easily... a little TOO easily. The second hole from the top actually stripped out and I was not putting much force behind the screwdriver at all! When I moved this to the other side of the room, I decided to go with a smaller pilot bit. I used a 3/16" bit instead. Granted, you are not going to thread the bolt in with a screwdriver - you will need a 10mm socket - but doing it this way, those bolts are not going anywhere! You could probably get away with a 13/64" bit, but to really protect your expensive TV, I would want all of the bite I could get!I also found that the inside diameter of one of the washers was a smidge too small for the bolt to go through. I just enlarged it with a round needle file, but since they don't include any spares, if you don't have a file or another washer laying around, you'll need to get one. Just thought I'd throw that out there in the interest of full disclosure.Once this was installed, I was impressed with not only the sturdiness, but also with the complete range of motion. This is fully articulated. You can put your TV pretty much anywhere you want to. The only thing it can't do is move your TV up or down, although you can tilt it to a certain degree.
J. Anderson
2025-07-14 10:05:29
The instructions were very clear and this was easy to assemble. It solidly holds my TV and the swivel works great.My one complaint is that in the photos the TVs appear to be on taller stands. On the highest post-mount my tv is actually slightly shorter than the height when little leg/feet stands that came with the tv. Not what I was expecting.
Ken
2025-06-03 18:04:28
I had just bought one from same company, but it was wrong size. Instead of returning it, I called the support# from the manual, as instructed. The rep was from the U.S., looked up my TV model# so I could order the perfect one. Clear instructions and quality materials! Great value!
jansarts
2025-04-09 13:33:32
Finally I can fit my tvs on places I want. Got rid of the tiny, little,spread out tv legs..Stand is sturdy,heavy duty,easy to put together. Very pleased. Came with many different screw sizes for many different tvs. It also swings back and forth and tilts forward and backward, great find!
RH
2025-02-18 18:18:48
Works great on my 43" Insigna TV. Came with a large variety of screws to fit other TV options.
J. M.
2025-02-06 13:54:23
2 things of note:1, we assembled the base with the matte paint side upward instead of the polished glass.and 2, I purchased this as the proverbial "scratch and dent" item.Even though this was repackaged, everything was there. Nothing missing. All is good.Assembly was straight forward and very basic. The base itself was well thought out for design, and as the one image shows, there is a wide range of sizes/spacing of the square backplate with the square patterns identified in the product description.The only downside is minor as you can see by the dust (in some areas these canbe dust magnets.). the second image shows the amount of swing I needed to get the image of the back of the set (no need to move the set from it's location to get that shot.), and the base and set remain stable through the range of rotation that the base allows. And with cats with no "situational awareness", a prudent investment to protect the set as it is much more stable than the factory feet it came with.
B.A.Simpson
2024-12-28 17:32:54
Used to support a 48" flat screen TV, this product consisted of durable metal components, with suitably heavy glass base. It was easy to set up, and once TV was installed, provided solid support, whether the TV was straight viewing or angled. Bolts for securing a TV were included, but I did not use, as my TV (Sony) already had proper size bolts installed on the TV
Recommended Products