Your cart is empty.
Your cart is empty.Product Description
i. This product is protected by Transparency, which verifies a unit’s authenticity and enables you to view rich information about the product you purchased. When you receive your product, please look for the Transparency logo and code. You can scan it to verify its authenticity with the Transparency app. Some products will also have enhanced content you can access after you scan it, such as [or select all that apply: brand story, product features, benefits, usage guidelines, set up instructions, installation instructions, or offers (if available)]. To download the Transparency app, get it on the App Store or Google Play.
ii. How do I scan the Transparency code?
1.Download the Transparency App and scan the barcode
2.The app will display a green checkmark when a product has been verified as authentic
PACKING LIST
- 1x Pressure Gauge
- 1x Straight Push-on Connector
- 1x Angled Push-on Connector
- 1x 16.75" Extension Hose with 14MM Connector
- 4x Adapter M10, M12, M14, M18 (Male, with O-ring)
- 1x Detailed Instruction
- 1x Customized Blow Molding Case with foam
8 PCS Engine Cylinder Compression Tester Kit
Perfectly for almost all petrol/gas engines: cars, motorcycles, trucks, chainsaws, lawn mowers, boat motors and other 2 or 4 stroke, single or multi-cylinder gasoline engines.
NOTE:
Please always release the pressure and reset the gauge before disconnecting the compression test.
Ensure that the cylinder pressure does not exceed the maximum range of the gauge.
Not for most diesel engine, due to the low pressure range 0-300PSI.
Gasoline GAS COMPRESSION TESTER PRESSURE GAUGE:
OPERATION
1. After the engine is running to normal temperature, stop the engine and disconnect all spark plug wires, clean all spark plug wells.
2. Remove the air filter and set the throttle plates to the wide open position.
3. Disconnect the ignition system and install the push-on connector , or screw the assembled hose into the spark plug hole. (Hand tighten only, DO NOT use a wrench, DO NOT over tighten) Then connect the gauge by the quick connector. Make sure all connections are fully engaged.
4. Crank the engine for at least 5 compression strokes until the pressure reading no longer changes. Record the pressure reading, then press the button (release valve) to relieve the pressure.
5. Repeat the above steps and measure each cylinder 2 to 3 times to ensure measurement accuracy. Don't forget to reset the gauges and crank the engine each time. The removed parts should be put back in place after the operation, especially before engine running.
Triple-scale Gauge
- Engine cylinder tester with precision manufacturing.
- Professionally tested,checking compression on petrol engine quickly and accurately.
Rubber-cone Adapters
- Rubber cones ends for quick check (no need to thread into head) without any need for threading
Brass Adapters
- Completed Kit comes with adapters for most applications
- With sealed O-ring
- Corrosion resistant, durability and no leaks
Skisworld
2025-08-24 18:23:02
A perfect addition to my toolbox
John
2025-06-24 14:54:49
Muy práctico y funcional.
juan domingo
2025-06-15 16:30:07
El medidor de compresión funciona bien, pero el comprobador de chispa funcionó un par de veces y se dañó la bombilla
CDCS
2025-05-01 18:05:22
Great price and product
John Morse
2025-03-12 14:00:02
This gauge was easy to use and over 6 cylinders gave consistent readings easy to use had plenty of attachments. Better quality than I was expecting
Rich
2025-03-11 14:01:16
Easy to use
chris vallett
2025-02-17 15:03:56
no problems saved me a lot of grief
Craig Davey
2025-02-11 10:57:14
Reads about 15psi too low at 135psi.
charlyale
2025-02-05 17:13:02
cumple con el trabajo de medir bien, es muy practico y cuenta con las conexiones para la mayoria de los motores
Leonardo
2024-12-25 16:01:43
Al conectarlo y querer medir la comprecion sube la aguja y mide pero inmediatamente empieza a bajar la aguja de la nada no mantiene la lectura de nada sirve el botón de reinicio ya que solo la aguja se baja quedando en 0 de nuevo muy mal producto nunca mas lo volverÃa a comprar ni lo recomiendo
Recommended Products