Your cart is empty.
Your cart is empty.Product Description
RAYZEEK occupancy sensor switch can automatically turn lights on and off by detecting heat emitted by the motion, it’s designed to replace a standard light or fan switch. The products use advanced passive infrared sensor(PIR) and MCU control technology which offers better stability than the traditional motion sensor, it’s easy and accurate to adjust the Time Delay, Detection Range, Light sensor value, and operating mode (Occupancy / Vacancy / On-Off ).
The wall-mounted switch automatically turns the lights on when you enter the room and turns them off after you leave. Keep saving energy and automate the lights in your home with the RAYZEEK occupancy sensor switch, which is ideal for laundry rooms, closets, bathrooms, or bedrooms, and so on.
Motion Sensor Light Switch
FEATURES
RAYZEEK sensor switch combines occupancy with vacancy sensors, and manual switch into one motion sensor switch for energy efficiency, security, and convenience.
RAYZEEK occupancy sensor switch can automatically turn lights on and off by detecting heat emitted motion. You can get the exact value for Lux value, Time delay and Working mode by just pressing the button on the sensor switch.
Instead of taking apart the panel to change different modes, you can directly change Occupancy mode, Vacancy mode ,or On-Off mode by pressing the big button and small button to meet your personal light preference.
SPECIFICATION
- Power Source:100-265VAC
- Power Frequency:50/60Hz
- Detection Range:150°
- Detection Distance: 6-9m max (<27℃ )
- Working Temperature: -20~+40℃
- Working Humidity:< 93%RH
- Detection Motion Speed:0.6~1.5m/s
- Installation Height: 1.2m~1.6m
HomeDIYer
August 29, 2025
Having tried most motion-sensing switches on Amazon, I can confidently say this is one of the best options available. I specifically refer to the model that requires a ground wire. All motion switches need a small amount of power to operate; some use a neutral wire, while others can utilize a ground wire to complete the circuit. Models that lack a neutral or ground wire draw power through the line/load, which is why they require a minimum load of 3W or 5W. I only recommend switches that require either a ground or neutral wire, as they tend to be more stable.I compared this model to four others I was using before discovering this one:Response Time: This switch has one of the fastest response times, activating in less than one second. In contrast, some other switches can take 1-2 seconds to respond.Settings Adjustment: You can easily adjust the settings without removing the switch cover plate. It offers a good range of timeout options.Always-On Option: This model features a small button that allows you to keep it always on (disabling the motion sensor). This is particularly useful in certain scenarios. A few other models offer this feature with a hard slide switch, but they come with other drawbacks.Price: While it's not the cheapest option, it's reasonably priced in the mid-low range. Given its superior features, I have no complaints.Overall, I highly recommend this switch, especially for those looking to save space with the one requiring only ground wire.
jb in colorado
August 1, 2025
like others, i searched extensively to try to find a switch like this. this is the only one i found. the little switch in the corner for manual use works perfectly. it makes it possible to manually turn on the light or turn it off - without a mechanical switch. and it is so easy to revert back to sensor mode - just push the large oval button.the "click" when the light turns off or on is slightly more noticeable than on my previous switches, but no issue at all - still as quiet as flipping a toggle switch manually.the size of the switch is just slightly smaller than the opening in a standard wall plate, so there's a small gap around the edges - that's the only minor issue i've encountered. the manual is understandable, and the programming interface is easy. finally.
J
July 3, 2025
Excellent instructions for installing
Searcher
June 18, 2025
I got two of these and love them better than any other motion sensor switches I've owned. They are easy to set the sensitivity and duration which is awesome. The only reason not a 5-star is they are rather noisy as they turn on, which no other sensor I've owned has been.
GV
June 14, 2025
I’ve installed and used motion switches for many years. When my last one would not turn off, I bought this model.OMG. It’s perfect. Here’s why:It has just 3 wires, no neutral required. Worked immediately first time.Instructions are well written and helpful.It comes with all a modern face plate with hidden screwsIt blinks short green when motion activated.Time can easily be set by pressing white button from 1 to 15 minute shut off.Button also turns on and off manually. Smaller button disables entire unit.You can’t beat the styling, functionality or intuitiveness for less.
Sean
March 7, 2025
I bought this for a simple LED hallway light that's on a single pole wiring setup with no neutral.It was working after I installed it but after 10 minutes the unit just stopped working.Returned
JTaylor
March 3, 2025
I installed this for the bathroom fan (Panasonic fan about 15 watts). The switch turns on after a second of detecting motion. I have it set to turn off after 30 minutes or the large button can be pressed to turn it off. The lux setting is set to off. Overall, works great.
bullwinkle1956
March 2, 2025
I had high hopes for this switch, and it worked great for about two weeks and then stopped Amazon was of no help since it was a few days out of their return policy. They provide no way to get in contact with the seller as all inquiries refer back to Amazon and you are stuck in a circular customer service that gets nowhere. I should have heeding the warning that this is a highly returned item and avoided it.
GFyffe
March 1, 2025
Nice not having to manually operate our bathroom light switch
derwin m
February 21, 2025
It worked just as I wanted it to
Alan
February 12, 2025
Good price Good product. Need connect green wire otherwise does work 😅
Customer
January 30, 2025
I bought this item to controle a low power light (led)instruction is clear for meeasy to install.I recommand.
Sylvain T
January 14, 2025
Fonctionne bien même avec lampes DEL , programmation possible.
Recommended Products