Your cart is empty.
Your cart is empty.Product Description
Product Feature:
✔Made of pure material, the surface air tube is bright and smooth, without burrs, with strong light transmission long service life.
✔High elasticity, high resilience, toughness, transparency, wear-resistant and pressure-resistant, uniform thinness thickness, consistent roundness of the cutting surface to ensure force.
✔Thick wall, smooth inner reduce media friction, excellent impact resistance, corrosion resistance.
✔Transport medium: Transport medium: water, air, non-corrosive liquid
✔Widely used in: automatic industry, workshop equipment, auto repair decoration spray paint, woodworking, dental equipment
6mm OD 4mm ID Pneumatic PU Tube With Connector(12meter)
Size:6mm OD x 4mm ID (12Meter)
Color:Blue
Material:Polyurethane
Working Pressure：0-145PSI
Working temperature:-40℉~176℉
Feature:Light Weight, High Flexibility, Strong Replying Force, No Deformation In Bending, Oil Resistance, No Corrosion, Aging Resistance, Flame Retardant
Package Contents
- 1 × 6mm OD PU Tube(12meter)
- 2 × PE-6,2 × PV-6,2 × PY-6,2 × PU-6
- 2 × PC6-M5,2 × PC6-01,2 × PC6-02
- 1× Tube Cutter
Product Feature
High Quality Raw Materials
High-quality polyurethane raw materials, pure color and high transparency, wear-resistant high-pressure resistant pipes, long service life.
High and Low Temperature Resistance
Wide working temperature, can be in -40~176°F( -40-80°C)temperature, to meet a variety of use requirements.
High Flexibility
High flexibility of the hose, small bending radius, resistance to external forces under does not deform, can be restored after loosening.
With Connectors and Tube Cutter
Our products include tube cutters and connectors. It is a good solution for your practical needs
Caution
- It is recommended to choose the liquid pressure reasonably ensure that it below resistance level of air hose. Also, for some corrosive liquids, ordinary PU hoses should not be used.
- Air compressor just out of the compressed air is high temperature and pressure gas, should not be directly connected to PU pipe, please link cooler.
- Indoor painting, generally high-temperature operations, the impact of high temperature, pressure resistance gas pipe is reduced, it recommended that air control within a reasonable range.
Stacyleigh Lewis
2025-08-23 12:07:35
I ordered this kit for my tire machine. I was skeptical at first because the company I purchased my tire machine from wanted over $300 just for the tubing and the fittings would be extra!!! I got it a few days later and installed it. It works perfectly!!!! For the price... I'm still amazed!! It was easy to work with when installing, no leaks, no issues. I'd definitely recommend and order again if I need anymore. Great product and fantastic price!!!
Tony
2025-08-12 17:57:30
Had a hard time tracking down 4mm tubing for an air ride seat that had a blown hose. No local supplier had anything close. This was a great price for A LOT of tubing and fittings. Worked great as a repair kit on our tubing, literally a few minutes and two couplings and job was done. Hasn't failed either, overall really pleased and surprised it worked so well. Will also work great as a backup in case of any future holes in the old tubing.
Buck
2025-08-06 17:04:51
Hoses fit nicely into fittings. Only thing missing are valves, but those are cheap, and not everyone will need additional shut-off valves anyway.
Keith
2025-07-06 12:10:24
Â
nickm324
2025-06-20 17:44:03
All parts were of good quality and included everything I needed.
jrperki
2025-06-19 17:59:23
I used this tubing to provide air assist to my diode laser engraver. It was flexible enough to fit through two cable chains and one right angle. It fit perfectly on my other 1/4" push connectors.It came with a very nice assortment of push connectors that worked and sealed properly.
Thomas
2025-06-11 10:19:32
Fittings feel cheap, but haven't leaked yet, and also seal with SAE 1/4" line, which is a bonus, as the 1/4" fittings usually don't work well with the 6mm lines.tubing is highly flexible, and easy to work with. NOT DOT approved, so no air brake lines folks. I used to plumb a pair of air bags, compressor and gauge setup on my truck.Compressor teed to tank and bag controller, with a 145psi -110psi switch. So far so good.However, when I recently mounted my compressor and tank permanently in my truck and cleaned up the hose and wiring a bit, I noticed that this hose was visibly bulging on one of the sections that sees 145psi constantly. As the bags don't see that much, I simply replaced the blue line in the tank/compressor/controller section with some of the Firestone 1/4" DOT line I had already running to one of my airbags. This might not have been necessary but I didn't like the swolen tube after only about 2 weeks under pressure. If it were to rupture without me noticing, it would cause my compressor to run constantly, probably until thermal shutdown or failure. So I also put a switch on the compressor and turn it off when I am not in the truck.
Richard R. Flores
2025-06-04 15:38:40
Great item worked perfectly for me.
Arturo S.
2025-04-14 16:10:11
Manguera de buena calidad me ha funcionado perfectamente contactada a compresores y las conexiones son muy fáciles de instalar.
Richard Gomez
2025-03-22 17:31:55
Es de buena calidad y resistente
seguralvaro
2025-01-29 18:54:44
tal como viene en las imagenes excelente producto de buena calidad
Cliente de
2025-01-25 11:35:32
Buena relacion costo beneficio, calidad razonable por el precio. Viene con algunos conectores bastante utiles.
Mayra
2025-01-12 11:47:04
Te soluciona el problema en lo que consigues algo de mejor calidad
Recommended Products