Topher Conrad
2025-07-25 11:18:51
Worked great on compressor tank.
B. Clemons
2025-07-21 18:36:55
As a DIYer who's worked in industrial settings, it can often be downright demoralizing to shop for consumer grade pneumatic gear. Short of spending thousands for the "real" stuff, we wind up with flimsy plastic knobs and cheap gauges and regulators that don't build real pressure. Then one day by some stroke of good fortune we come across a little gem like this. Discreetly straddling the commercial and consumer realms, this quality regulator packs all the nifty features one could ask for in a "real" regulator like a t-handle (that's metal!) that turns smoothly in a package small enough to fit on a consumer-grade machine. Best of all, it's able to be completely disassembled, reversed, and reassembled to suit one's needs.
BART
2025-07-06 12:41:06
It’s doing what it is supposed to! I have tried the expensive ones, and they did not last more than a year so I decided to try a less expensive one! Working good so far!
zoomJLzoom
2025-06-18 15:48:34
I've never preferred the regular plastic knob for the regulator control because quickly enough, they seem to leak around a seal, or the plastic cracks during the winter. So I bought this T-handle style and have used it for a number of months and I'm glad I got this style. Comes with a bracket, and gauge, which matches my tank pressure says. I mostly use it with a blow gun for when I don't need to stir up a lot of dust and make it go flying everywhere. Also, with finish carpentry it comes in handy.Only thing I regret is not buying the entire kit that includes 2 water separators. I was cheap at the time, but when you buy them together, you do save.
Greg and Crystal
2025-06-15 13:55:32
All the knob style regulators seize up within a year and then strip when you try to turn them. This handle style is exactly what I needed and wish I had found sooner
RICHARD CLARK
2025-05-15 18:23:57
Needed the 1/4 connection and that’s what I got. Took the old one off and replaced it with the new one all worked A+.
Douglas D. Myers
2025-03-16 13:00:25
Compressed Air Regulator, nice regulator just what I expected
Caleb
2025-03-03 16:13:51
I'm not one to bash products. I bought a fair amount of PneumaticsPlus products for our new air system in the fabrication area of our facility. Having been through a fair number of air regulator set-ups, I wanted to go with a good one. This looked like the answer. It lasted right at a year, and now has a 1/16" hole blown out the side of the body, just like if it was done with a drill bit. And, no, we don't have the pressure way up on our system. The compressor cuts-out at 140 psi.I won't buy another of these, but I am still trying other PP products, though one other of their filter/lube set up has self-destructed as well. Theres a lot of options out there for these type regulators so I'll go with someone else and hope for better results.
dave
2025-01-05 17:06:36
this t handle is way easier to adjust than the round handle ones
Langer
2024-12-08 18:17:59
I ordered this one because I had bought a cheaper one before, and it was crap. The first one I received had a leak, contacted the seller, they apologized and sent a new one right away, at no charge. The second one works flawless. I would recommend this regulator.