Your cart is empty.
Your cart is empty.Lippert™ Motor Service Kit
Customer
2025-08-31 17:24:48
Works well
Customer
2025-06-28 10:57:13
Works great, got our jacks working for the rest of our trip. If you are installing this on the road, you probably will not be able to pull the old bearing out of the pump housing. The new bearing comes pressed on to the motor shaft and must be removed. I used a battery cable puller after trying to gently pry the bearing off.The new motor has a plastIc plug on top. After removing the plug, you can turn the armature with a socket wrench to align the slot in the armature with the pump coupler. I tried several times to get the coupler, housing and mounting bolts to line up. I finally removed one bolt, slid a length of straightened coathanger through the insulating sleeve inside the motor and used the coathanger wire to find the threads in the base. I was then able to thread the other bolt into the pump body. Be certain to get the second bolt into the insulating sleeve after you remove the coathanger.I was working nearly blind on our coach. Your installation may be easier if you have better access. On our coach it was a bit more difficult than, as an example, changing a battery.
Copperhead_stu
2025-05-10 18:36:28
If you own a large motor coach, you know the importance of the hydraulic pump. Correct part #, correct part- installed in less than 30 minutes. In use for the past few months with no issues.
Basden C.
2025-03-16 14:12:19
This motor was an exact replacement and burned up after the 3rd use. Don't buy it!!
James A.
2025-02-23 15:30:23
Fast shipping, easy install
Carolina Siemering
2025-02-10 13:41:55
Works 100% perfect
marshall tymofichuk
2024-12-20 15:54:23
Works like new
Recommended Products
