Your cart is empty.
Your cart is empty. PART NUMBER:
523900, 520819, 521976W, 521976
522967, 523036, 523143, 523432
523498, 523529, 523931, 523983
524094, 524097, 524246, 524327
524411, 13-1109, 13-1119, 13-1133
130-1164, 130-1187, 130-1219, 130-1235, 130-1204c
K01265B300, K01265E300, K01265F300
K01285F300, K01469B300, K01531A300
SPECIFICATIONS:
Speed 9 RPM @ 850 in-lbs
17 Amps 12 RPM @ 400 in-lbs
9.5 Amps 14 RPM (no load)
Voltage 12 DC
Torque 850 in-lbs
Holding Torque 500 in-lbs
If you have other questions, you can contact we.
Al Smith
2025-08-27 17:14:04
Replacement cost for these is around $800 from the dealer, this one fit perfect and did the job. The motor is a little smaller and probably goes a little slower but I’m in no hurry when extending or retracting my slide and the cost savings was fantastic would definitely buy again.
Neal P. Mowchan
2025-08-22 13:09:17
I had a 523551 motor and it worked perfectly.
Dunrollin
2025-08-01 13:27:32
My model number was not listed in the description but I decided to order it anyway. It was a simple 20 minute job to install and my 13 foot long slide was back in service. I was very pleased. On this one the motor was smaller than the original one but it seems as strong as the one it replaced.
Striider
2025-07-05 11:29:12
I have a 2008 Tiffin Phaeton 40 QDH with a Power Gear part number 524094. Front driver's slide was making a clunking noise because 3 of the mounting points had broken out of the gearbox casting. This part was a direct fit replacement, and runs much more quietly than the original. Took me about an hour to replace, as the output shafts move laterally just enough to easily remove the motor and replace. If this continues to function as quietly and smoothly as it does now, I am a happy camper! Thanks!
Steve wells
2025-03-29 11:40:23
These motors are powerful work much better than original
Customer
2025-03-24 13:43:37
The bolt holes, shaft, and wiring all lined up. Took 8 min. to install. The slideout goes in and out like it did before.
Bobby Coomer
2025-03-12 14:14:43
Good service worked like it should mached up too OEM
Monty Scott
2025-01-27 16:48:27
Like many imported products this motor assembly is made to appear like the OEM motor. But the quality of materials and manufacture are designed to achieve a lower price making function secondary.I installed this motor on the Super Slide of our 2017 Entegra Cornerstone. It was able to extend the slide but could not begin to retract it. It didn’t have the power to lift the slide the inch required in order to start the retraction path.I should have spent the money for the OEM motor assembly.
Recommended Products
