Shopping Cart

Your cart is empty.

Your cart is empty.

Power Stop Z36-1363 Front Z36 Truck and Tow Brake Pads For Cadillac Escalade Chevy Silverado 1500 Suburban 1500 Tahoe Sierra 1500 Yukon XL 1500 [Application Specific]

Free shipping on orders over $29.99

$58.78

$ 25 .99 $25.99

In Stock

1.Style:Carbon Fiber


About this item

  • The Carbon-fiber ceramic brake pad not only features thermal scorched pad surface for a fast break-in but chamfered slots for noise-free braking
  • The Carbon-fiber ceramic brake pads are chamfered and slotted and have premium stainless steel shims to ensure noise-free braking, just like the stock brake pads
  • An upgraded with powder coated backing plate perfect for muscle cars, significantly enhances braking performance and extends life by resisting rust and corrosion
  • Z36 Carbon-fiber brake pad set includes brake grease and premium stainless steel hardware kit. Before installing the rotor, clean it with mild soap and water. Then, wipe it clean with a lint-free cloth
  • CONFIRM FITMENT with the Product Description below!


PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes - no matter where or how they use their vehicle. The PowerStop Z36 Truck & Tow carbon-fiber ceramic brake pads are designed as an upgrade over stock brakes to reduce brake dust & eliminate noise for those that tow and haul, as well as the off-road enthusiast. These brake pads are made with a low-dust ceramic formula, infused with carbon-fiber, to strengthen the compound and provide severe-duty stopping power for trucks and SUVs. Premium stainless-steel hardware, along with ceramic brake lubricant, is included with the Z36 brake pads making it easier to complete your brake job. Use Z36 Truck & Tow brake pads to give your truck or SUV the severe-duty stopping power it deserves.
This Fits:
2008 Cadillac Escalade-Models with Front Caliper Bracket Cast #351/352C ONLY
2009-2020 Cadillac Escalade-All Models
2008 Cadillac Escalade ESV-Models with Front Caliper Bracket Cast #351/352C ONLY
2009-2018 Cadillac Escalade ESV-All Models
2008 Cadillac Escalade EXT-Models with Front Caliper Bracket Cast #351/352C ONLY
2009-2013 Cadillac Escalade EXT-All Models
2013-2020 Cadillac Escalade XTS-6 Lug Models
2008 Chevy Avalanche-Models with Front Caliper Bracket Cast #351/352C ONLY
2009-2013 Chevy Avalanche-All Models
2009-2014 Chevy Express Van 1500-All Models
2007 Chevy Silverado 1500-New Body Style Models
2008-2018 Chevy Silverado 1500-All Models
2019 Chevy Silverado 1500 LD-All Models
2015 Chevy Silverado 1500 SSV-All Models
2015-2020 Chevy Suburban-All Models
2008-2014 Chevy Suburban 1500-All Models
2008-2015 Chevy Tahoe-All Models EXCEPT Police
2016 Chevy Tahoe-LS; LT; LTZ Models
2017-2020 Chevy Tahoe-LS; LT; Premier Models
2009-2014 GMC Savana 1500-All Models
2007 GMC Sierra 1500-New Body Style Models
2008-2018 GMC Sierra 1500-All Models
2019 GMC Sierra 1500 Limited-All Models
2007 GMC Sierra Denali-New Body Models ONLY
2008-2014 GMC Yukon XL 1500-All Models
2015-2020 GMC Yukon Xl; Yukon Xl Denali-All Models
2015-2020 GMC Yukon; Yukon Denali -All Models


Robert
September 1, 2025
Had them on for over 3 weeks now on our 2008 Chevy Suburban LTZ with Summit Racing 450hp crate engine 5.3l Vortec. Great pads! Fast and aggressive stopping power when needed. Great in the cold and snow as well as in the rain! Will be buying this brand the next time I need new pads. May be getting new front rotors by this brand in the near future. Pads seem to be erasing the deep groves from the old pads that had metal on metal. Rotors may not be needed for a little longer. Rear pads will be next to replace.Great value, extra Hardware included such as noise making shims or regular shims, no noise at all under hard or regular braking, perfect fitment and smooth as butter even during hard fast braking!
Richard Rahl
August 30, 2025
I have a 2015 Silverado 1500 4x4.I have never used Power Stop products before but bought these brake pads based on reviews and opinions of others I know who had.The package arrived in good nick and included an assortment of pad clips and a very small packet of lubricant.Replacement is pretty straight forward with no issues.These pads have tight tolerances so using a wire brush or electric wire wheel, ensure you thoroughly clean the slots and lube the clips on the caliper that the tabs sit in otherwise you may have difficulty getting the pads to seat correctly and/or they may bind.As I said, the kit comes with a small packet of lubricant. However, it is nowhere near enough to lube the guide pins and required contact points. I prefer to use Permatex Ceramic Extreme Brake Parts Lubricant for this purpose.I have driven about 2,300 miles since the installation and the pads have worked well with good braking performance.NOTE, for optimum braking performance, it is important to bed new brake pads. Bedding brake pads allow new friction material on the pad to properly wear-in and the pad to match the profile of the rotor surface increasing contact and maximizing the braking performance.Find a stretch of road where you can conduct this procedure safely and legally.Accelerate the vehicle to 35 MPH and apply moderate brake pressure reducing your speed to under 5 MPH. Repeat this process 3 times.Next, increase speed to 50 MPH and strongly reduce speed down to 5 MPH. Ensure you don’t brake hard enough to activate the ABS or lock up the tires. You should be able to slow to 5 MPH within a few seconds. Repeat this process 4 times.IMPORTANT: DO NOT make hard high-speed stops during the bedding process, as it may cause the new friction material to overheat or glaze and possibly damage the rotors.Continue driving an additional 1-2 miles while very lightly braking to cool down the brakes. You will want to avoid heavy braking at this time so try to take a route home with minimal traffic lights or stop signs.Park the vehicle and allow the brakes to fully cool for an hour.
Joseph Russo
August 11, 2025
Brake pads were high quality,hardware is great quality ,they work awesome and they are really quiet,I will use these pads on my next brake job
Gary Van Eperen
July 12, 2025
I installed these on the front brakes of a 2010 GMC Denali, they stop great and very low brake dust.
Larry
June 30, 2025
ok
Mike T
May 16, 2025
I replaced the pads and rotors. The PADS were far superior in construction to the OEMs I took off my Sierra. I would highly recommend them. A joy to put on and the fit perfectly.
Sara Isaacs
March 26, 2025
I drive in brutal traffic stop and go is the norm. I have these installed on a 17 Yukon xl and they have performed well, I installed them myself about a month ago, and broke them in as instructed. And so far no complaints braking is smooth and predictable no noise, little dust, and feel just good as the stock pads. I would recommend these pads. If anything changes I will update this review.
Shawnathon
March 25, 2025
Bought as a replacement for my original Powerstop big wheel kit. Turns out I had a wheel bearing squeaking and not the brake pads. Went ahead and replaced them but old pads had over 3 years on them with 24” wheels and still had half the life left. Didn’t need to replace them but hey why not? I love and recommend Powerstop and have never had brakes last so long. Forever customer now!
Andrew E.
March 13, 2025
Much better than my OEM pads on my Tahoe.
Rogelio Aburto Sánchez
February 12, 2025
Muy buen frenado. Se instalaron en una silverado 2008.
MOHAMMED ALSHEHHI
February 9, 2025
فرامل ممتازه وقويه وذو عمر اطول
Cole Hawkins
February 4, 2025
Arrived quick easy install
Mohammad Waseem
January 24, 2025
Perfect fit for 2008 gmc sierra denali. Good brakes. Recommended!