Your cart is empty.
Your cart is empty.Product Description
Pro Chaser PC210591378 Carburetor Package
Center to center mounting hole distance: 53mm / 2.1''
Fuel Nozzle O.D.: 7.7mm / 0.3''
- Replaces BS part number 591378 697978 796321 696132 696133 796322 699958 697351 699966 698455 695918 694952 695919 695330 796323 695920 695328
Center to center mounting hole distance: 53mm / 2.1''
Fuel Nozzle O.D.: 7.7mm / 0.3''
- Replaces Craftsman 580.325600 580.325601 580.326301 580.325610 Generator
- Replaces Briggs & Stratton 030430 030430B 01646 Storm Responder 5500 Generator
Water Bear
2025-08-29 18:08:38
Perfect fit for our 20 year old Briggs & Stratton powered Porter Cable generator. The original carburetor finally failed on the fourth day into Hurricane Milton's power outtage. Kit comes with different choke levers for varying models. Prefilter and filter element look decent. Tested and starts and runs as easily as the OEM. These would make great spares. Side note- my engine required required e10 E-torx sockets to remove / install carburetor. Hope this was helpful.
Nick Pannell
2025-06-19 11:48:49
It is clearly a cheap clone of the original Nikki OEM carb used by Briggs & Stratton. Overall quality is good and it does work properly!In my application (Wheel House 5500 generator) I needed to swap over both the choke and throttle shafts which was simple enough. There are no fuel adjustments on this carb. One pull and it fired right up. The included air filter fits and appears to be of good quality. Bottom line, this is a good alternative to rebuilding the original carb although I did order a kit from B&S and intend to have that carb ready as a backup if/when this one fails. Time will tell.The kit of assorted parts… let’s just say I won’t be using those. But they are good enough to put in the drawer of random power equipment parts, just in case.
Michelle Crispens
2025-04-27 18:10:27
This carburetor fit my Coleman GenPower 305 (6250 watts 10hp Briggs) very well. It was easy to change the choke lever with the instructions on the Amazon page. The only issue I had was that the governor control rod did not fit in the governor rod control clip on the carburetor. I very carefully opened up the hole in clip with a 3/32" drill bit.
Printer Pro
2025-04-24 09:00:09
I love these universal carbs, they give you everything you need to get up and running. This kit comes with everything, all I had to do was swap over my choke plate and arm, mine was metal versus plastic. First pull and it fired right up, I did notice the manufacturer runs it very slightly rich, probably due to the fact rich is better then lean and under a heavy load a bit more fuel will prevent overheating and seizure. I was running only a 100w load during testing. And I had a tiny skip every few seconds until I cut the fuel shutoff down just a little bit. Not worried about this at all. Under load it will be fine. Nice these cheap carbs are available, especially if you fail to properly store and maintain your equipment. This found on the side of the road generator needed nothing more.
EagleEyeSG
2025-04-21 15:54:20
Generator had a bad surging problem. This kit fixed the issue immediately. Great and cost effective
Don Stakes
2025-03-12 12:35:52
My Generators carb started spewing gasoline during hurricane Beryl, unfortunately it did this 3 days before power came back on. My first order of this carb sent me an incorrect product, no fault of the device, i submitted a return and the new one arrived quickly. I got it on my generator and was up and running just in time for power to be restored the next day. Works like a charm!
Joe R
2025-02-23 20:25:27
I installed this carburator on my generator. It started up first pull.
Niles
2025-02-13 10:17:58
This carburetor will bolt up, but is not quite a correct fit. It is listed as fitting the Coleman Powermate 6250. The main issue with this carb is that the stock air filter will not attach to it. I ended up not using it and purchased a different carburetor.
Customer
2025-01-22 14:40:18
this carburator came exactly as advertised and with everything needed and more to quickly switch out the old carb for this new one. Works great with no hassalls
Recommended Products