Your cart is empty.
Your cart is empty.
Great Addition to any Garage and Home
Pro-Lift B-004D Grey Hydraulic Bottle Jack is a 4-ton bottle jack that is ideal for auto, truck service, farm and shop use. With the heat treated critical stress areas, it ensures long life performance. In addition, the carrying handle makes it so easy to carry around wherever need it.
It features the steel lifting saddle that is engineered to hold load securely.
With the extension screw, it allows Pro Lift B-004D Bottle Jack to be adjusted to accommodate desired work height.
Pro Lift B-004D Bottle Jack also features Built-In bypass system to protect against ram over-travel.
- Steel Lifting Saddle Engineered to Hold Load Securely
- Extension Screw Adjusts to Accommodate Desired Work Height
- Built-In Bypass System to Protect against Ram Over-Travel
- Heat Treated Critical Stress Areas
- Designed to Meet the Latest ANSI/PALD Standards
Specifications
- Capacity: 4 Ton
- Lifting Range: 8 x 15-3/8 inch
- Carrying Handle: No
- Item Weight: 9 Lbs
Grab one now to add to your home tool set
Tracy c
2025-07-27 13:45:09
Works as a Jack but was too tall for the vehicle I bought it for
peggy morris
2025-07-17 14:21:36
worked great in construction lifting
Clayton Banks Jr
2025-07-10 10:29:10
The Pro-Lift Hydraulic bottle jack does the job and is reasonably priced.
Forestry Major
2025-06-28 16:21:40
I am using these to help jack up my house they are just the right size and I made some plates with a keeper out of 1/4" plate steel and cookies of pipe so they don't push into the wood. They are easy to raise and lower and the handles are well made. These were the cheapest jack option I could find and at 4 tons they are able to lift with out being so big you can break things. Overall I am really pleased with these. Of course they will leak off eventually but that is expected you just need a lot of blocks or jack stands.
Bob
2025-06-27 13:51:23
I see low reviews on here because people didn't think to check the height of their vehicle at the jack point. The height of this jack starts at 8" so if you have a car with lower height than this, you need to look for a different jack that's just a little under the car clearance height. Not too much less though, because this only goes up a little over 7" and you need to get your tire off the ground.Also, consider and leave room for a jack pad. The round top is small and only somewhat slotted, and I'd worry about it slipping off the frame rail, or possibly bending it. I got the "ABN 5-½in Large Jack Pad Universal Fit Cross Slotted Frame Rail Protector". This combo works great with my 2014 Subaru Forester, which has a clearance height of 8.7". I guess if you have a higher truck you could use a board underneath, but I'd be a little uneasy about the stability. Like all jacks, don't get under the vehicle unless you put it under jack stands.Jacking up my Subie is soooo much quicker and easier with this bottle jack over the scissors jack that comes with the car. I have a set of mounted winter tires so I'm not using jack stands that you might want if you are just rotating a set of tires.To lower the car it does a controlled release when you turn the lowering valve counterclockwise. But it only lowers it until the weight is off, and with that jack pad I found it just a little difficult to get the lift out from under the car. The demo video is shown without a car, and they just put a hand on the top to show how the lift lowers. I thought if I could lift the jack from the bottom against the frame it would lower it the rest of the way, but that didn't work for me. I think the rubber jack pad had enough flex for me to get the jack out but I only tried it once.The demo video is a bit odd in that it shows them turning the value a lot more than the 1/2 turn that the manual says to do. Not sure which way is right. I guess I'll turn it only as much as needed to lower it. To raise it, you turn it clockwise until it stops.
Joseph Lindamood
2025-06-25 14:27:51
You can pump up a Jeep XJ and probably old Wranglers too with stock tire diameter on the axle. Be sure to get jack stands, it's not safe to get under a car or change a tire using this thing alone on the axle. But if you have jack stands, it won't be an issue. You could also try the bottom of the differential / transfer case.If you're using a vehicle with little to no ground clearance, you might have to buy two of these or a floor jack to get the car up to change the tire or do other work. To use two, you'd stick it under any frame piece you can get it under. It would still be too low for a jack stand, so you have to try and crawl further in and get another one under the axle from there. Then you can get it under jack stands.Otherwise, this thing is very easy to use and very easy to pump up a car. Don't forget to use the screw to extend the height up to contact before you start pumping.
Joe W.
2025-05-13 20:41:48
Worked perfectly for me. My load was light. But no reason to believe it won’t do what they say.
Amanda Sims
2025-05-05 20:45:35
Don't trust this. Not only did it not lift the vehicle...a low vehicle (this is supposed to be for taller trucks)...it started leaking fluid as soon as it came under load. Don't trust it.
San
2025-04-04 15:24:12
I received my equipment in perfect working order. It's great equipment I advise to buy. !
Ifa Ibrahim
2025-03-19 17:57:51
Item oil leaked when i loosened the release valve more. If i have to pay back for this item please let me know.
Alan Oleg Velazquez
2025-03-15 12:04:21
Ya me ha sacado de muchos apuros. Es un buen producto.
michael l.
2025-02-15 10:25:10
works well on my suv but too high for sedans...good deal for the price.
Leonardo Desales Sarmiento
2025-02-12 10:49:29
Â
Recommended Products
$55.69
$ 25 .99 $25.99