Your cart is empty.
Your cart is empty.QD Sling Swivel Mount for 2 Point Sling.
Matthew
2025-08-23 10:39:05
Offset Sling mount was just what I needed to make my rifle hang properly, quality seems to be good. Everything is okey-dokey.†it’s all about the angle of the dangle.
Mariachi
2025-08-11 15:04:19
Simple well built. Should last years.
Gearmaster
2025-05-31 16:33:29
On my rifles where the lights are mounted to the side of the rails, they can interfere with being able to mount a sling on the side, and instead I’ve had the sling attachment on the underside of the rails at the six o’clock position. This has not been my favorite solution, since it angles the front of the rifle away from my body when I tighten the sling to let the rifle hang close to my chest, or the sling interferes with the light or an attached foregrip.This little mount, which is only for picatinny rails (not MLOK or KeyMod), solves the problem when I need to mount a sling under the rail, because this mount pushes the sling attachment point further to the side. I have found this mount to be an ideal solution to my issues. It weighs 0.7-ounces without the swivel, or 1.5-ounces with the swivel, so it doesn’t add too much weight to your rail.This is quite solid and the QD mount and cup lock-up tight, and the finish is free from burrs or defects. I also like that it is a matte black and not glossy, and the design with a hex screw that recesses into the housing is much nicer than some other angles sling mounts that I have, although it does make it a bit wider at 0.8-inches wide.My only nitpick with this style of mount is that when the QD mount is inserted into the cup, will lie at an angle that is not perpendicular to the rail, but it is not that much of an issue. Be aware that there are no stops in the swivel cup. So, the swivel rotates freely a full 360-degrees.Ten bucks seems to be a decent value. In order to make sure I adhere to Amazon’s Community Posting Guidelines so that this review is not flagged, I do not have any pictures of it mounted on my rifle.
Steve B
2025-04-29 12:29:23
This has the "flaw" that another one I tested has. The part that tightens onto the rail seems to flop loose when you back off the bolt. It doesn't make it difficult to attach, but you do need to pay attention a little bit more than on some of the brand name models.Once it's snugged up, it is secure and works just fine. I tested it with a number of other QD bases, cups, and sling swivels and it works with all of them.This works pretty well on a budget. I'll update my review if it breaks or I have other issues with it.
Bob
2025-04-02 14:35:23
This QD sling mount is low profile, so low foot print.I am running it on a 11 pound .255 MAGPUL rifle.The QD is strong, it rotates well, and it releases smooth.It is a little stiff, but still has smooth rotation. This QD with its low cross section fits very well below my 3x9x42 , and still has plenty if space for your secondaries (lasers, 45 offsets, etc, etc).Solid machined aluminum, good threading, great screws, and they are tight on the pic no rattle.Awesome QD sling mount a must have!
Lenny H
2025-03-22 12:59:54
Mounts are well made and secure tightlynto the rail. Easy way to install a sling.
KuoH
2025-03-20 12:02:56
This QD sling pic rail attachment is very well finished without any sharp edges and has very smooth threads, unlike my previous one which stripped and broke. This one was easy to attach to the pic rail very securely and the QD insertion and removal is also very smooth. I'm not sure yet if I like the QD point being offset to one side instead of the traditional middle of the mount style, as it puts the sling quite close to the front backup sight on my PCC, but it does just barely clear. Overall it is a good complete QD kit even though the pricing is a bit on the high side.
Jim D.
2025-02-12 18:48:09
This mounts easily to a picatinny rail. It is well made and you can attach pretty much any type of sling to it.
Recommended Products
