Your cart is empty.
Your cart is empty.The QEP Wet Tile Saw is ideal on job sites where space prohibits the use of a large wet saw. The 3/5 HP, high-torque motor and included 4 in. continuous rim diamond blade cuts through unlimited sizes of ceramic, marble, slate and stone tile up to 3/4 in. thick. This tile saw even cuts mosaic tile and backsplash tile for DIY projects. The water system not only reduces water runoff, it recycles the water back into the reservoir, minimizing refill frequencies. This dependable wet saw includes dual extension tables to support larger tiles and a hinged cutting table for miter cuts. A 4 in. blade with a 5/8 in. arbor is required. For cutting porcelain and hard tiles, we recommend using the QEP Black Widow Blade, sold separately.
Vanessa Rutherford
2025-08-31 18:42:43
Cannot for the life of me figure out why this thing has so many poor reviews. I used it on 3/8 inch thick 12 x 24 porcelain tile to do my shower surround and it completely defied the odds. I saw another review where the person used it to cut that size of tile and even included pics. I almost didn't believe it, but yep. It works. And with only a few modifications. I placed it on top of an old wooden work table and braced it with 2x4s so it wouldn't vibrate off the surface. Then, I built a small addition to the exact height of the saw & placed it on the right side in order to be able to use a straight edge when cutting. All it took was a piece of 1x4 and some clamps. If you're the average DIYer, you'll probably have this stuff lying around. I also purchased the black widow blade for it because I knew I'd be cutting a thicker, harder stock. This was my absolute first time working with tile and it was a bear. This saw cuts slowly & what's worse, if you do try and rush the cut, you'll get chipped edges (of course that's probably a characteristic of most any tile saw especially if the user is inexperienced).All things considered, if you take your time and pay attention to what you're doing, this saw is more than sufficient. I was going to buy the cheap Skil wet saw, but going with this one saved me $70 bucks. I tiled a 54x36 in alcove shower in roughly 11 hours. As a tile novice, I think I made pretty good time with it. My advice, if you're on a budget and are needing a tile saw, this is a good choice. Even if I went to turn it on again for future use and it didn't work, I would still have gotten my $30 dollars out of it. Especially after what I've spent on the project as a whole, lol. ☺
Matthew Nelson
2025-08-01 17:28:52
This was a fantastic product. Once you get it set up, it's easy to use and gets the job done. I was cutting natural stone that was about 1/4 in thick, and I never had a problem. As others have mentioned, the water does get dirtier and dirtier the more you cut, but if you change out the water every so often, no problem! The saw blade that comes with the product is great - no need to buy another blade.I used this wet-saw to cut tile for a kitchen backsplash. I had only intended to use it one time and then throw it out (a great use of $50). However, after using it it's still in great shape. I changed my mind and I'm going to hold onto it in case I need it in the future.I do see how this could be considered "flimsy" or "like a toy" or "cheap" as other reviews have commented. However, these qualities did not effect the usability of this product at all, and it was easy to forget about them once you got started. Is it made from cheap materials - yes. But, if you're expecting something made out of metal (not plastic), and something bigger (not small like this), then you need to go and spend more than $50 somewhere else and buy (or rent) an expensive wet-saw (and for no good reason)!Just get this saw - it's all you need.
Dawn W.
2025-07-13 16:23:39
Best suggestionsDo not use saw on your floorSuited for smaller tile, but large tile does workBe aware of how much water is in the saw, and remove and replace when it starts getting clay like from the shavingsGreat for the price. I was skeptical from the reviews. I got this because it was cheaper to buy then to rent a saw. I am a beginner and I knew it would take awhile to figure out how to cut everything and such, so I would have needed to rent a wet saw for several days and this worked fine. I used a 12x12 porcelain tile. I will say when cut my bullnose it was a lot easier. So I suggest a light subway or a 4x4 or 6x6 tile is probably ideal for this tile saw. I would not use for a 24x24 like they say you can unless you are desperate and only need to cut one or two. However I did use a 12x12 and it worked fine, it just took longer for the saw to cut through and some times it felt like I was fighting against the 4 inch blade. I had a hard time using the arm that let you cut on an angle, because I needed under 2 1/2 inch triangles. The extender didn't do anything for my large tile because I used the bar to help me cut straight. There is a measure on both sides starting in the middle at 0 and going out to 6 inches. Obviously not helpful for a large tile, so you have to go off of what you need to cut off, not what needs to remain.I read a review that said its great and compact and you can use it on the floor next to your job. I started out doing that, huge mistake, I kept getting the water everywhere and I didn't have good leverage to cut the tiles, it was a pain. Plus the saw moved while I was cutting my tile. I put a folding work bench in the room next to the bathroom and put a bunch of plastic down underneath and put a bucket under the tile saw to catch any water runoff from the tile and that was manageable. It wasn't the best but it made it easier then going out to the garage or down the basement or somewhere else.Finally the biggest put off for this was the hole in the bottom of the saw. I understand its so you don't put too much in, but it made it very difficult to pick up and dump when needing to change the water. When the water becomes clay like you'll notice that the amount of water that is coming out of the blade area is low or nonexistent so I had to scrape out the clay clumps and fill up again.
ML
2025-06-14 18:53:13
Needed a wet tile saw quickly and didn't want to spend a lot of money. I figured if I could get 1 use out of it, it paid for itself. I was surprised how easily it went together and how well it worked. The guard and guide were flimsy and shifted a lot, so it was just easier to guide the tiles by hand. Cuts were fairly clean. I would keep a towel handy to wipe down the tray where the tile lays as a lot of bits and shards can build up on the tray and near the blade, but easily wipes away. Definitely use the spray shield or you will be covered in water from the spray off the blade. Overall for $32 it was worth the money as I was able to get the tile job done on time and with decent tile cuts.
Scott Kubacki
2025-05-28 19:54:12
Junk. Don't waste your money. Cuts are horrible. Takes forever to make a cut. I can't return it, so it's going in the garbage.
The QCC
2025-05-04 10:15:02
This is an all plastic trim saw and I was a bit skeptical when I ordered it after reading some reviews referring to it as a toy..The first surprise was when it arrived and I picked up the box. It felt heavier than I anticipated.Unpacking the QEP 22400Q made me feel better. It is plastic, but it is very solid and rigid.The only real downside to getting the saw up an working was installing the blade. You must first remove a flimsy splash shield. Removing the shield is no problem, putting it back is a royal pain using the tiny #4 Philips screw.The water reservoir is quite shallow and if overfilled water pours out the end and onto the table and floor.Using it as a trim saw, the fence is placed close to the saw blade and there are no concerns about the fence flexing .The QEP 22400Q is truly an inexpensive trim saw for the hobbyist maker of thin sections of rocks, minerals and fossils.The saw easily cuts 4mm - 7mm slices of stone, marble, fossil matrix and miscellaneous rocks.A small specimen size works best, but 35mm thick pieces can bu cut using two cuts.If you need to trim thicker slabs the QEP 22700Q nay be a better purchase,The included blade cut marble and quartz with ease.A tad messy, but manageable. Probably best used in a garage, outdoors or in a basement that is easily mopped up.Nowhere near as messy as the old style 6" wet saws.I have no idea how the QEP 2400Q cuts tiles, but it does a nice job on small rocks and stuff.
Artemio Velazquez
2025-03-17 19:43:54
No me gustó que el disco q trae se acaba rápido, pero hace muy buen trabajo, lo digo para q se prevengan con un mejor disco o d mejor calidad pero la máquina hace buena función
JML
2025-02-25 14:41:45
Apenas ayer empece a usar el producto y creo que es bueno para el bricolaje. El problema que encontré es que se siente frágil las patas para la inclinación de la mesa y que le hace falta un desagüe para poder limpiarla.Los cortes qué he realizado son pocos pero la cortadora have su trabajo a su velocidad.Pienso que el disco cuando haya qué reemplazarlo va a ser un poco difÃcil de encontrar por sus caracterÃsticas de tamaño y eje.También su quieren cortar porcelanato tienen que cambiar de disco. Este sirve solamente para ceramica.No se puede poner más que en disco de diamante continuo.Los cortes a 45 los hace bien y no mordisquea las orillas
DC
2025-02-05 14:29:34
Works quite well for thinner tiles. Water spray is tolerable, but would be nice if the measurement guides were gridded across the table portion rather than only at the front and back which has too much play when tightening the guide. Wish the table portion that you lift to add water (or cut angles) was removable to allow for easier clean up. Good for price though.
D Paige
2025-01-14 14:09:23
Yes, I can agree with some of the other reviews saying the unit is made out of plastic, and cheaper than other units. but saying this I was installing backsplash tile and this worked great. The unit performed flawlessly and did everything I could ask for. You do have to watch the build up of tile dust in the water tank, but you only need to wash out the tank every so often.( with a hose outside it would take only a couple of minutes). For the DIY homeowner this is all a person needs for small tile jobs.
Recommended Products
