Your cart is empty.
Your cart is empty.Product Description
Kimberly Baldassarre
2025-09-05 16:26:04
I love this little set. Having the PTX candle come in both clear and black is great - and the scraper is nice and sharp but could be too sharp, so be careful (had to wear a cut glove). The sander scrubbies are durable and work amazingly in order. PTX stayed on really well and filled all the gouges I had on my skis very well. Super nice product!
Dad Doing Stuff
2025-08-31 14:52:51
This is a decent repair kit. I just patched up a few spots on my backcountry skis and it worked really well. The candles are a lot longer and larger than I expected. 7-3/4†long each. So you are getting quite a bit of P-Tex. The metal scraper works very well. It’s nice and sharp and also not flimsy. So it works well for scraping off excess P-Tex as well as excess wax. It comes with enough P-Tex to last the average skier for many years.
skwirly88
2025-06-15 12:33:46
Havent used it yet, but looks like a good repair kit.
ngpaul
2025-05-31 18:41:52
This is great for repairing the small gouges you get from hitting a rock or an ice ball. Instructions are clear and easy to follow.
Grant
2025-05-06 18:15:17
Great value for the money I bought a used board with several deep gouges in the base probably more than 20" and I used less than half of a stick. The scraper and scratch pads included make it really easy to clean up the base after you fill in the holes. Would recommend
Customer
2025-04-12 12:52:55
Got this to do some repair work on my 30 something year old xc skis. Worked great and so easy to do. I had some pretty bad gouges and scraps from skiing on frozen gravel. Spent a bit of time preping the bases by removing the wax base and cleaning up the edges of the gouges. I also used my waxing iron to preheat the bases. Lit the candle and moved slowly and carefully. Keep the candle close to your work and hold it at an angle to keep the carbon to a minimum. After cooling down the included scraper mad quick work of leveling out the area. A couple quick passes with the scotch brite pads and a finally buff with the white pad and I was ready for a base wax. I have only been out once since the repair (figures all the snow melted) but the repair held perfectly. I used about a third of a candle to repair about 4 ft. of scratches of at least a fingernail width wide. So much cheaper than a new pair of skis.
Garrrett Brucia
2025-03-31 11:10:19
Good for repair
Tho Vo
2025-03-24 12:12:59
Arrived early with no metal scraper
ã¨ã£ã¨ã“
2025-03-19 16:20:54
リペアã¯ã“ã®ã‚»ãƒƒãƒˆã§å®Œçµã—ã¾ã™ã€‚é»’ã¨ç™½ãŒå…¥ã£ã¦ã‚‹ã®ã§ã€ã»ã¨ã‚“ã©ã®æ¿ã«å¯¾å¿œã§ãã‚‹ã¨æ€ã„ã¾ã™ã€‚
Katie
2025-03-06 13:06:17
Great kit for salvaging my poor snowboard after I punched holes and scrapes into it during a visit to Meribel. Good choice of grades for the sanding pads, and I was able to get rid of most of the light scratches without ptexing it. ALWAYS SAND DOWN THE LENGTH OF THE BOARD!So, sand down the whole thing if your board is bad, and then light a ptex candle. If you're using clear then it helps to let it burn for a few moments and then wipe it on a plate to get the black soot off the end, otherwise you get black on your board. Drip it into the holes and let it set. Then get the metal scraper and, lengthways, scrape all the excess off. Get the finest sand pad and go lengthways down the board, gently, to put the grooves back in the base. These are important to displace water and stop the board sticking to the snow. Finally, wax as normal and buff. Your board should be good as new! I'll enclose a before and after photo of an example of the repair job after Meribel. Hope this helps!
RayO
2025-02-12 15:19:52
Good little kit for board repairs. Plenty of p-tex with handy little scraper and brushes. All you need!
Armed_Sirloin
2025-01-07 17:53:09
I had some pretty nasty damage to the underside of my board, and this kit allowed me to fix it. The process os fairly straightforward. Prepare and clean the surface, melt the wax sticks onto the damaged area, then scrape back excess wax so that it is level with the rest of the top layer.The only issue i has was the wax burned while it was melting, resulting in horrible back/brown bits of wax on the board. So it wasnt entirely clear to see the design underneath. However, you'll only notice it close up and from a distance it wont be seen.
Customer
2024-11-17 19:09:38
Easy to use
Recommended Products
$189.00
$ 78 .99 $78.99