Your cart is empty.
Your cart is empty. Please check the compatibility list of our switch rack mount kit.
J9279A
J4904A (2848)
J4906A (3400cl-48G)
J8164A (2626-PWR)
J8165A (2650-PWR)
J8169A (610-EPS)
J8474A (6410cl-6XG)
J8692AR (3500yl-24G)
J8692A (3500yl-24G-PWR)
J8693AR (3500yl-48G)
J8693A (3500yl-48G-PWR)
J8696A (620-EPS)
J8992A
J9049A (2900-24G)
J9050A (2900-48G)
J9065A (800-NAC)
J9087A (2610-24-PoE)
J9089A (2610-48-PoE)
J9145A (2910al-24G)
J9146A (2910al-24G-PoE+)
J9147A (2910al-48G)
J9148A (2910al-48G-PoE+)
J9279A
J9310A (3500yl-24G-PoE+)
J9311A (3500yl-48G-PoE+)
J9420A
J9421A
J9470A (3500-24)
J9471A (3500-24-PoE)
J9472A (3500-48)
J9473A (3500-48-PoE)
J9521A (RF MGR CTRLR)
J9573A (3800-24G-PoE+-2SFP+)
J9574A (3800-48G-PoE+-4SFP+)
J9575A (3800-24G-2SFP+)
J9576A (3800-48G-4SFP+)
J9584A (3800-24SFP-2SFP+)
J9585A (3800-24G-2XG)
J9586A (3800-48G-4XG)
J9587A (3800-24G-PoE+-2XG+)
J9588A (3800-48G-PoE+-4XG+)
J9625A (2620-24-PoE+)
J9627A (2620-48-PoE+)
J9726A (2920-24G)
J9727A (2920-24G-PoE+)
J9728A (2920-48G)
J9729A (2920-48G-PoE+)
J9772A (2530-48G-PoE+)
J9773A (2530-24G-PoE+)
J9778A (2530-48-PoE+)
J9779A (2530-24-PoE+)
J9836A (2920-48G-PoE+-740W)
J9853A (2530-48G-PoE+-2SFP+)
J9854A (2530-24G-PoE+-2SFP+)
J9984A (1820-48G-PoE+)
JL071A (3810M-24G)
JL072A (3810M-48G)
JL073A (3810M-24G-PoE+)
JL074A (3810M-48G-PoE+)
JL075A (3810M-16SFP+)
JL076A (3810M-40G-8SM-PoE+)
JL255A (2930F-24G-PoE+-4SFP+)
JL256A (2930F-48G-PoE+-4SFP+)
JL261A (2930F-24G-PoE+-4SFP)
JL262A (2930F-48G-PoE+-4SFP)
JL263A (2930F-24G-PoE+-4SFP+-T)
JL264A (2930F-48G-PoE+-4SFP+-T)
JL356A (2540-24G-PoE+-4SFP+)
JL357A (2540-48G-PoE+-4SFP+)
JL385A, JL386A
JL557A, JL558A, JL559A
ROC
2025-09-06 17:11:30
What's more to say? Good quality, fits perfect, and came with a nice assortment of screws for what I assume are various applications. Well done.
Renaissance Matthew
2025-08-16 17:08:11
Most reviewers don't say what they used this on, so here you go: I used it on an HP Aruba 2530-48G PoE+ Switch (J9772A) that I bought used without any of the accoutrements. Incidentally, I've handled more than my fair share of HP switches (ProCurve and Aruba) and I'm pretty confident that these were designed for those kinds of switches.The holes matched up perfect, the screws to attach the brackets to the unit were perfectly sized (P2 Philips head) and went in smooth. But the screws for mounting to my rack were too fat for my setup. This was not a problem for me because I have a surplus of screws designed for my rack, which has static holes, NOT squares (the included rack mounting screws were for square rack rails and they include the appropriate square nuts that give us all injury-anxiety you set out to remove them). To be sure, if I had a square rack rail-hole system, they would've worked great.Some commenters lamented that the ears are too wide. In my case, they protruded about 1/16th of an inch wider on each side than the TRENDnet patch bay units flanking above and below. This also wasn't a problem for me, but beware if you have tight tolerances in your setup.Overall, I think these are perfect for anyone who needs to mount an HP Aruba switch and doesn't have the original gear.
Jessica Williams
2025-07-14 11:34:48
Brackets are great, really nicely made etc. Screws are WAY too short. I’ll have to make a run to the hardware store for longer screws so that’s frustrating. Satisfied otherwise
Wilton
2025-07-08 11:12:28
Like the title, does not work for Ubiquiti Dream Machine Pro router. I even used some other methods to enlarge the holes (outside of hand filing) and could not make the holes match up.No where on this item listing states it works for it, but I would do EVERYONE a favor. Does not work. The short screws DO work.
P in Corona
2025-05-29 12:34:41
I ordered two of these, and the screws for both were about a quarter inch too short. Not a huge problem. I went down to a hardware store and bought a set of screws that were a quarter inch longer. I highly recommend.
William Zade
2025-05-01 14:24:03
Exactly as advertised, mounts up well.
Christopher J Vandemore
2025-04-25 10:25:03
Getting these attached to the 1u gear that I want to mount is a difficult task. Once attached, the ears are too big and don't fit in the rack. Maybe these are universal in a different universe from mine.
tech Wizord
2025-03-25 13:00:19
Fast shipment and product is nice.
Ace
2025-02-27 09:06:41
not as good as OEM but works
Ralph Schrader
2025-02-17 16:29:54
alles prima geklappt
Ludo H
2025-02-15 16:20:07
Kit de qualité mais un peu cher
massimo
2025-02-13 10:15:19
consegna rapida, materiale nuovo, adattati anche ad altri switch
william
2025-01-28 12:35:12
There isn't much more to say about it, it's an L bracket and the dimensions and the holes are all as they should be.
Recommended Products
$44.07
$ 19 .99 $19.99
$59.99
$ 28 .99 $28.99