Your cart is empty.
Your cart is empty.Product Description
Patch Panel Cat6 Wall Mount Support Stable Connectivity and Fantastic Speed Performance up to 10Gbps.
The Rapink ethernet patch panel support excellent performance transmission up to10-Gigabit, compatiable with the TIA/EIA 568-C.2 standard and cat6, cat5e, cat5e UTP cabling system.
Standard 10-inch 1u patch panel suitable for Wallmount.
All 8P8C of network network rack patch panel are golden plated to support better network connection up to 10G speed Ethernet network.
This patch cat 6 wall mount made of steel frame.
Assembly 12 Cat6 Patch Panel with Punch Down Tool in Right Way.
Network patch panel cat 6 is extremely easy and straight forward to install and use.
1. Cut off Cable sheath 2.5-3 cm.
2. Depatch each corlor wire and put into IDC hole according to 568B color labling on patch panel ethernet.
3. Punching down all wires into the hold of IDC connection with a punch down tool.
4. Tie up cables with plastic cable ties included to make them stable connectivity. This step is important.
5. Screw the 1u patch panel bracket on to racks with mounting bolts and nuts included.
Important:
With zip ties, it can effectively reduce the deformation of the ethernet cable, improve the working stability of the network connection port, and avoid the occurrence of network failures caused by the loosening and deformation of the cable.
Clear 568B Labling on patch panels cat6 for Quick Reference of IDC Termination.
1. The punch down block allows to use both 568A and 568B standard with the punch down tool.
2. There is no problem punching down the solid Cat 6 lan cable 23AWG with solid connection.
3. Modular patch panel 12 port is economic in cost, great in value.
4. Ethernet patch bay segmented out based on portions of the panel. Therefore, if one port goes broken, you do have to take out an entire section to replace or repair. Nearby 5 other ports can still be used with good connectivity.
Clean up the look of your cabinet or wallmount with quality piece 12 port panel.
1. This network patch panel cat 6 will make your home network cabinet look much cleaner.
2. Ports of rj45 patch are solid, well-constructed, and hold rj45 patch cables well.
3. Cat 6 patch bay fits right on the rack
4. Used for home network and office network, there is no issues terminating any of the wires and had good connections throughout the panel.
5. Makes the installation straight forward with Included the color coding on the punch out patch.
10G Performance
1. IDC Termination of network patch panel cat 6.
2. 568B labling of patch panel cat6 12 port.
Strong and Durable
1. Wall mount cat6 patch panel made of steel.
2. Lable space of 12 port ethernet patch panel for hand writing.
3. All 8P8C of 12 port punch down panel are gold plated.
Cable tie
1. Cable ties of punchdown patch panel is to reduce the deformation of the ethernet cable.
2. 4pcs Screws included to fasten punch panel onto racks.
Wallmount
1. Rj45 patch wallmount
Lugnut
2025-08-28 11:04:28
Nice patch panel. Works as expected. No complaints.
WarEagleEE94
2025-08-10 09:04:23
I am using this in a structured panel and it works great. Easy to read guides on the back and everything fits nicely.
Christopher Lue-Shing
2025-07-18 13:10:38
I purchased this for my home network for placement in the basement. I've been working in IT for some time and when I had the chance to run a few lines in my house for access points and internet connections, I immediately thought about putting a small patch panel in the basement to clean up the connections. I purchased this patch panel, a puchdown tool and some cat 6. I also purchased a POE tester with connection wiring testing.I followed the T568B wiring standard on both the patch panel and the terminal connections on the cat 6, tested it with the POE tester and all connections were verified.
Joseph J.
2025-07-14 12:07:06
Â
Lucas F.
2025-07-06 15:07:04
I added a structured wiring panel to my 1969 home with a number of CAT6 runs to various devices with back feeds to three DECO WiFi 6 mesh pucks. Added this to have a legit 110 panel demarc. Everything terminated without issue and all devices are working perfectly.
James D
2025-06-24 17:59:34
Terminated 8 connections with zero drama...the last 4 nothing but failures....pulled the connections off dumped it on a keystone works 1,2,3 and tests fine. Got a second panel basically the same nonsense but this time 4 were drama free.Same wire same tool, I have punched 1000s of jacks in my life. Total junk there is a reason this is cheap skip this panel and buy the keystone blank one....and put in the keystones...save yourself
Affiatic
2025-02-17 10:49:26
Used this when I decided to run Ethernet throughout the house. Worked well
BrusselsSprout
2025-01-31 15:14:37
This is a capable implementation but does vary from industry standard design. The black metal panel thickness is half the thickness of industry standard design. The white plastic mounting bracket is a universal fit for both this and industry standard thicker panel. This also means this thinner panel must be used with this mounting bracket as the industry standard mounting bracket will not retain this properly.With this caveat the panel is a capable design.
Recommended Products