Your cart is empty.
Your cart is empty.Product Description
Pine Wood Veneer Edge Banding
ebpsneer Pine Wood Veneer Edge Banding is made of real pine wood, it is easy to process and apply to different project.
Our wood veneer is pre-glued with hot melt adhesive that provide a strong bond, it also can be remove and reheat.
The glue is activated by heat and will strongly apply this veneer edging onto your shelf, furniture,cabinet,plywood,MDF,partical board,OBS board or wooden DIY project.
It's easy to use,just apply it to the furniture edging and iron on with a household iron.
Size 1: 2" x 50'( W50mm-L15m)
Size 2: 3/4”×50’ (W19mm-L15m)
Size 3: 7/8”×50’ (W22mm-L15m)
Size 4: 1/2”×50’ (W13mm-L15m)
Size 5: 1-1/2”×26’ (W3.8mm-L8m)
How to Apply for Furniture
Wood edge banding roll can be applied with an iron, hot air blower or it can be applied with an edgebander machine. Trimming and sanding as required after the glue turning dry.
Use a steam iron or dry iron,Do not use steam with water, dry heat is required.
Switch to "Fleece" or similar gear, then hold for about 3 seconds and move forward(Don't press it too long, otherwise it will burn the edges).Before operation, try for a short period to master the method. If the hot melt adhesive does not melt or burns the edges, please adjust the pressing time or gear appropriately.
Simply use household iron, hairdryer with hot wind or edge banding machine to attach. Trimming and sanding as required after the glue turning dry.
Joseph N.
2025-08-29 13:26:03
Went on super easy on my 1/2 inch plywood drawer boxes. Looks great
Alex
2025-06-09 17:02:10
I recently got my hands on this Pine Edge Veneer, and let me tell you, it’s was amazing to work with!First off, the quality is great. The veneer arrived packaged in a clear bag and in pristine condition—no warps, no tears.I used this edge banding on the tops of drawers I made to hide the unfinished edge of the 1/2" plywood. Applying it was a breeze - I used an iron to melt the adhesive and trimmed the excess with a little trimmer tool I bought at a big box store. I didn't paint or stain the banding, but I image it would take either just fineOverall, Pine Edge Veneer gets five stars for quality, ease of use, and the ability to make me feel like a woodworking pro. Highly recommend!
Michael A. Breskin
2025-02-28 15:00:20
I have been working with wood for over 20 years, this brand edge banding is the BEST I have ever used.The glue is very strong, stronger than most, the grade of this tape feels solid, not like a lot of the others that feel flimsy, splinter easily and has glue that does not adhere well. With the other products I have used I have to constantly run my iron over several times before getting a really good bond. I barely have to use my brayer on this brand of Veneer edge banding tape. I highly recommend it!!!!. I also rarely if ever write product reveiws. I feel this Veneer tape is very much worth mentioning. Thanks very much for this product Ebpsneer!
Recommended Products