Your cart is empty.
Your cart is empty.Product Description
Rockwell RW9157 Replacement Screw, Flange and Allen Key for Sonicrafter Tool
From the Manufacturer
Replacement flange for the Sonicrafter tool, inlcudes screw, flange and allen key.
Alan
2025-09-05 15:18:54
Allows to use cheaper blades.
DVD Fan
2025-08-29 15:18:56
Replacement of good quality
Robert Pauletta
2025-08-20 14:38:14
Can't belive it fit our saw
Delaine Thompson
2025-08-13 18:19:41
N/A
clark
2025-07-29 10:10:37
like that it fit and can use my tool againbut only time will tell if the part is not made of soft metal
Matthew Dyer
2025-07-28 18:36:17
The new Sonicrafter has gone to a toolless blade change so this part and the older model have gone the way of the do-do bird. Still, I have the old Sonicrafter with this screw hold-down and it does work well. If you don't need the absolute speed the toolless change gives you--and really, we're talking about maybe 10-15 seconds longer--the old model still makes sense and works well. Keep in mind that the new model uses a toolless blade change like the old Bosch jig saws, and Bosch quickly got away from that system because of complaints. YMMV or it may be the same.If you have the old model, it makes sense to pay $5 for one of these. If you're in the middle of a project and lose the screw you are, well, screwed. Buy this and put it in the case. It's cheap insurance.
Jarrell heard
2025-07-25 12:42:11
Perfect
Southern Contractor
2025-07-22 13:22:25
I strongly recommend replacing the OEM screw and collar that comes with the Rockwell Sonicrafter with this part. Out of the box, the Sonicrafter has a fluted head screw with a hex driver which recessed into a collar/washer to attach the blades. After a couple months of use, I stripped the hex key hole in the screw. There is no edge to grab on to with pliers or any other tool. I tried a screw extractor with no success. I had to (very carefully) use an angle grider to cut the collar off so I could use vise grips to get the screw out. I ordered 3 of these replacements although they are a little different than shown in the picture. The advantage of these replacements is, in addition to using an allen wrench to loosen/tighten it, the screw has a 12mm hex head that should the allen wrench strip the hole, you can easily remove it with a 12mm wrench or socket. It also seems more durable than the OEM. I also keep a couple extras in the bag should I lose it or drop it somewhere it can't be retrieved.
LMil
2025-06-29 09:45:40
My husband needed to replace this screw and wrench that was lost and the screw was stripped. Worked great. It fit and solved the problem.
Andrew
2025-05-06 10:03:41
It works perfectly
Patrick Cooke
2025-03-25 18:48:16
worked great
Tyrone Lyn
2025-02-18 15:58:14
Perfect replacement fit for my Rockwell tool
j.e.
2025-01-26 13:11:01
it does what its suppose to do.
Recommended Products
