Your cart is empty.
Your cart is empty.After lifting your vehicle it is highly recommended to install a drop pitman arm to correct the vehicles steering geometry. Due to the increased height, a vehicles turning radius can be affected. The drop steering arm is specifically engineered for lifted applications and is a simple solution to correct draglink alignment and reduces steering vibration.
John Britton Steele
2025-09-01 13:13:11
excellent value and design
David Butcher
2025-08-15 21:06:55
This worked very well to help me clear the sway bar linkage on my 97XJ I have about 8 to 9 inches of lift and this brought it down just enough work perfect very pleased Would highly recommend if you’re running a lifted XJ
MobileTech
2025-07-31 17:22:21
This pitman arm fit my lifted (3.5" lift) 92 XJ with a 4.0. I bought this to drop the angle of the drag link as the link end boot was being torn by the sharp angle where the end link meets the pitman. This also helped a bit of bump steer I was having.
Richard W.
2025-07-30 13:56:27
The pitman arm that came with my 6.5" lift was a little skinny thing. This one has some heft to it, and she thick. Much better pitman arm.
anthony price
2025-06-13 15:16:36
way better than stock one
Piotr
2025-05-14 16:30:32
For my Jeep ZJ is OK
Kaylyn Stewart
2025-04-20 17:11:38
Worked flawlessly. Installed it on a 6 inch lift with stock steering. No one tells you what you have to change and what you dont on lifts. They want you to change everything no matter if it will work or not. Running 33s on stock steering with just this drop arm
Amanda Powers
2025-03-28 12:27:05
This pitman arm set up the geometry perfect for my dana 60 swap in my 2000 XJ.
Raul barrientos
2025-03-19 13:27:17
Excelente producto llegó bien en tiempo y forma
Jesús Emmanuel Rodriguez Rodriguez
2025-01-22 10:05:36
Llegó a buen tiempo y de gran calidad
Recommended Products
