Your cart is empty.
Your cart is empty.Product Description
Dual Stabilizer
Single Stabilizer
- Easy bolt-on installation.
N3 Steering Stabilizers
Available in Dual or Single Dampers
- Improves control and handling.
- Reduces bump steer.
- Reduces tie rod and ball joint wear and tear.
For Larger Tires
Reduce Vibration in Steering
For Lifted Suspensions
JeremyJ
2025-08-15 13:18:59
Install was fast and easy. Works as it should. No more death wobble! Great fit on my 2000 Jeep Wrangler.
Josue
2025-08-05 10:17:14
To be fair, the OE part wasn't even holding it's shape anymore. It was very worn out. Installation was very easy. Possible complications could come from corrosion on old hardware. Use a good penetrant spray and you should have this job done in a half hour or less. Stability was very noticeable. Greatly improved overall ride quality over busted worn out old stabilizer.
Nora Foster
2025-08-04 13:38:37
Fit great and fixed my death wobble
Jeffrey Scott
2025-07-17 18:35:10
Work good, had to fabricate a bit to fit jeep WJ.
Raul Alvarado
2025-07-10 15:45:46
nice quality and fit. easy intall.
Georgi
2025-06-17 11:03:43
Fits well to Jeep XJ.Good functionality one year after driving off-road. Great for the price.
Greener
2025-06-02 13:42:40
Beefier than the OEM one I just replaced. 1999 Jeep Sahara 285/70/17 (same as 33x12.5x17) with 177,800 miles. My Jeep has a 2003 frame swap and a 2003 dana 30 front axle. I do not have the DW, all my ball joints and tie rods are in decent shape, however my steering gearbox is a little sloppy. I replaced the OEM with this because i went from 31" tires to 33". I'd rather be preventative than reactive to issues. All the hardware is there for the TJ, something people are missing is, the long bolt that is in the kit is NOT for your TJ. It states to reuse the 12mm bolt that is on the axle mount. Do not use an impact to tighten, the instructions state hand tight. Since this is a steering component I used blue locktite on the hardware. I might toss the RC sticker and get something with Jeep humor, like "this side up" or "honk if this falls of"I will update after I get the brakes done so I can take it for a spin.
martin
2025-03-23 18:19:24
Perfect fit, made a big difference in the “twitchy†steering (bushings were shot in old damper, plus better damping effect out of this one). Highly recommend if your damper is worn.
Esta súper Chingon Le quito todo el bamboleo
2025-03-22 17:07:55
Me gusto que es súper rÃgido, de buen material y le da una vista diferente por abajo a la maleducada
D
2025-03-01 15:22:21
This steering stabilizer is actually so fat that it doesn't fit as a replacement for the original (which is much thinner). There literally is no space for it.And the seller gave me so little time to return it for a refund after I advised them I wanted to return it, the link they sent me to print out the return label expired before I had a chance to print it. Now they won't let me return it and I have just lost $60. BEWARE!
SMW
2025-01-17 15:39:35
UPDATE: The pronounced bump steer I have been experiencing since I bought the Jeep has all but gone. I believe this to be a result of installing the new stabilizer. had expected a generic gray stabilizer b/c many reviews said that is what showed up. I am happy to report the shock that was delivered was exactly as described and included all the hardware I would need to install. It even came with the Rough Country sticker, which is a very nice touch.The unit itself is solid, more so that the OEM factory one I removed, which had given up the ghost. It was a bit of a struggle to remove the old one, despite liberal PB Blaster and BFH applications. The trick I found was to use a CAN$19.99 Pitman arm puller from Canadian Tire. That did the business in minutes.I reused the original frame-side bolt and nut but the supplied bolts were more than adequate for the other end with the locking washers and nuts. All high quality. I torqued both bolts to 50 f/lbs, and it's solid as a rock. It looks really nice with the Rough Country logo, and performs considerably better than the factory one. As another reviewer mentioned it doesn't return to center quite as fast as the stock one, but it's still very early days and I expect it to bed-in/settle as I use it. I am very pleased and it's great bang for the buck. Shipping was next day, so no complaints there either.Note I did *not* have Jeep death wobble, and if I did this would not fix it - just mask it at best. If you are thinking this will make your death wobble issues disappear, it won't. Period.All in all I am very pleased with this purchase, and will happily recommend it to any TJ owners that are thinking of an upgrade or a replacement.
lozaaa
2024-12-26 18:15:23
Second one I have had on my Jeep over 10 year. Feels like new again after replacing.
اØمد
2024-11-25 14:17:45
يناسب شيروكي xj
Recommended Products
$44.95
$ 19 .99 $19.99
$124.95
$ 61 .99 $61.99