Your cart is empty.
Your cart is empty.Product Description
- Conceals the gap between the body and frame.
- Barrier to help protect and shield from rocks, mud, salt, and harsh weather.
Rear Wheel Well Liners
Made of HD Polyethylene
Enhances your truck's appearance by providing a more finished look. Bolt-on installation that's easy enough to do with common tools at home.
Backed by Rough Country
Serge
2025-07-31 13:45:41
I read review and was a little bit skeptical about the quality and possible fitment. However, decided to try - I still can afford a risk of $100. I received them without a box, just connected with zip-tie. Was it an issue ? - absolutely not. The packet with bolt and clips is securely attached to internal liner (they were stacked one inside the other.) I install them in less than 15 mins, taking into account that the first liner took longer - i couldnt find the right way to put in initially. Fitment is perfect - all the holes on the both liners match the U-clips and the rear hole. The diff is probably about 1/4 in and definitely within the play of plastic. The easiest way to put it in place is rotate it couter clock wise first, make sure the rear side is inside the rib, then accurately rotate clock wise till the rear side is in place and then slightly bent the front side and put in place. Sorry for not so clear explanation, but I'm sure your got the idea. I agree that instructions can be better - but I also saw much worse ones :) After all - i'm pretty happy with the purchase - and definitely can recommend it.
Shane A
2025-07-26 14:28:52
2018 F150. I anticipated holes not lining up and a loose fit. Not the case. The holes all lined up and the liner fits into the wheel well snuggly. It takes a little bit of elbow grease to tuck it all into where it needs to go but it's not too bad and install for both sides was about 15-20 minutes total. I also like how the liner hangs below the bottom of the bed by about 1.5 inches so you don't see thru and gives a nice clean look. They were also delivered in 2 days.
Wreckenbach
2025-07-15 19:16:54
They look great. 2015 F150. XL Screw. Perfect fit. Easy install. Let em sit in the sun for 20 minutes. Put the front edge in first, that's key. Value for money-meh, they're plastic, inexpensive to mfg, spendy to ship. The value comes with looks and you don't get the annoying 'ting' sound of rocks hitting the underside. They've held up well so far.
Royalty2341
2025-06-25 15:58:56
They were shipped and delivered in a timely manner. Arrived in no box but everything was there both liners and few installation parts with instructions that were stuck to the inside very well, there's no way they will fall out. Installation was extremely easy, the instructions were very clear but almost not needed there that easy to install. Them seem to be a decent quality built all the holes lined up well. Just installed so can't say about longevity. Compared to OEM Ford or husky liners these are much cheaper. Build quality is lower than OEM style as there's a few areas around the liner that could have been secured better but for the price point I'm not disappointed since OEM is $200.
C. Warkentin
2025-06-15 14:13:12
Already had the rough country 3 inch lift and suspension kit. Figured I’d try these out too. Liners are shipped unboxed and zip tied together. Kind of surprised to find on my porch like that. Not an issue though as they arrived just fine. Very easy to snap in place and the hardware came attached in a baggie. Liners do a good job of covering the inside bedframe that’s normally exposed, and in front and behind the tires where tread throws the mud. They do cover the upper shock mount bolts which I like. To change shocks you’ll have to pull away and get a wrench wedged behind, or pop them back out, or use a razor knife and trim the plastic around the bolt head. I think these will last for years.
Alan Hart
2025-06-10 13:42:54
Hides the leaf springs. Gives it a sleek look, keeps mud and debris off the frame.
Charity D
2025-06-04 16:37:02
Perfect! Very easy to install! Fast and look great and work well! The only issue I had was that whoever added the stickers to these put one of the larger ones on the inside not the outside which shows when you out them on. It took me longer to get the sticker off then putting them on both sides!
Tammy
2025-04-05 13:36:11
Good fit, read the instructions and follow them these can be a little difficult to fit the edge of the liner under the inside rear fender lip but if you wear durable gloves it's about 15 mins per side. You need to use some force to fit the liner inside the fender. Once it's in properly, these liners probably won't come out even without the fasteners ( unless you remove them) The only minor issue I had was at the rear end of the truck fender there is a trim piece held on w 2 plastic darts. Only one of those two dart holes lined up exactly, the other was slightly angled. I heated a center punch w a propane torch and used it to adjust the second dart hole now the 2 darts fit nicely into the liner. The local dealer quoted me $250 installed for a set of these. While these are not ford branded units they are of OEM quality and fit IMHO.
Brent March
2025-02-21 14:36:18
Looks great, perfect fit in my 2020 F150. 20 mins max to install
Shawn
2025-02-18 14:28:21
Easy to install
Jay
2025-01-27 14:50:35
Product doesn't look anything like the picture shows it looks like complete cheap plastic garbage i would recommend not buying rhis products
Recommended Products