Your cart is empty.
Your cart is empty.Product Description
Firm and Sturdy
The template woodworking adopts acrylic material strong and sturdy,which measures about 0.2 inch/ 5 mm in thickness, not easy to deform and rupture.
Tear off the surface film before use
Please tear off the surface film before use, so you can have a better use experience.
Smooth edges
Acrylic charcuterie board handle template with smooth edges to avoide cutting and scratching your hands.
David
2025-09-03 13:59:22
These are easy to use to cut out handles for your cutting board and you get 4 of them so the value for your money is quite good, I will say though and this was a my own mistake moment I was routing out along the edges of one of these templates and, again my own mistake i cut right into the template and ruined one of the handles, the project still was finished nicely but sadly the template was ruined in the process :(Picture of my finish board is provided but you can see on the bottom of the handle part there is a weird indent: that was where my error was! lol
BobbyT
2025-08-31 12:37:46
Good thickness, good quality. Should hold up well. I like the assortment.
tsel_shaddai
2025-08-02 10:42:15
When I first opened these, they looked terrible. It turns out it that the CNC machine these were made on did not cut the protective film well and left torn edges. Once it is removed, they are much better. Packaging was hit or miss, as these were just loose in a bubble mailer.In summary, the quality is fine, but might give you a poor first impression when opening the package.
Corvairking
2025-07-25 11:02:11
Great item and price and quality. This can really add variety to your board making.
Amos Baker
2025-07-12 16:21:18
Decent
vitamin
2025-06-19 13:51:31
I really like the whimsical shapes, which make these stand out. They are a little small for what I want, so I rout the outside with an oversize bushing and not a bearing bit. I did have to sand a brass bushing down as these are thin. Hey, that is perfectly fine.For the loop, I pre-drill a hole (or holes) larger than the bearing bit to reduce the amount of material but also for safety, and then start centered in the hole. Of course the bit / bearing (or bushing) determines the look, but then I hate sanding sharp / tiny inside corners so bigger is better. Of the 4 I like the whale-tail / mermaid tail best. I haven't seen anything like that, so that makes it special / different and of course no hole, so that makes things a bit simpler - just flush cut and round over. Nice!LYMOI offers the set of 4 for $12.99 which is a good deal. If I could choose, I would want them to be both bigger and thicker though.
Kevin
2025-06-07 10:38:42
These will be perfect for adding our own cutting boards to our laser products.The templates are easy to use and work great. The set gives several options for shapes and there are so many different looks you can get, we are really excited to start making these.
Ronald C Dudelston
2025-04-04 14:31:28
Two of the templates had bumps where the plastic wasn’t smoothly cut. Not a huge deal because the bumps could be sanded off but far from perfect.
David
2025-03-27 18:39:44
These are easy to use to cut out handles for your cutting board and you get 4 of them so the value for your money is quite good, I will say though and this was a my own mistake moment I was routing out along the edges of one of these templates and, again my own mistake i cut right into the template and ruined one of the handles, the project still was finished nicely but sadly the template was ruined in the process :(Picture of my finish board is provided but you can see on the bottom of the handle part there is a weird indent: that was where my error was! lol
BobbyT
2025-03-21 15:24:26
Good thickness, good quality. Should hold up well. I like the assortment.
tsel_shaddai
2025-02-25 09:34:23
When I first opened these, they looked terrible. It turns out it that the CNC machine these were made on did not cut the protective film well and left torn edges. Once it is removed, they are much better. Packaging was hit or miss, as these were just loose in a bubble mailer.In summary, the quality is fine, but might give you a poor first impression when opening the package.
Corvairking
2025-02-16 19:25:20
Great item and price and quality. This can really add variety to your board making.
Amos Baker
2025-01-23 11:10:51
Decent
vitamin
2024-12-27 13:11:23
I really like the whimsical shapes, which make these stand out. They are a little small for what I want, so I rout the outside with an oversize bushing and not a bearing bit. I did have to sand a brass bushing down as these are thin. Hey, that is perfectly fine.For the loop, I pre-drill a hole (or holes) larger than the bearing bit to reduce the amount of material but also for safety, and then start centered in the hole. Of course the bit / bearing (or bushing) determines the look, but then I hate sanding sharp / tiny inside corners so bigger is better. Of the 4 I like the whale-tail / mermaid tail best. I haven't seen anything like that, so that makes it special / different and of course no hole, so that makes things a bit simpler - just flush cut and round over. Nice!LYMOI offers the set of 4 for $12.99 which is a good deal. If I could choose, I would want them to be both bigger and thicker though.
Kevin
2024-12-24 16:15:52
These will be perfect for adding our own cutting boards to our laser products.The templates are easy to use and work great. The set gives several options for shapes and there are so many different looks you can get, we are really excited to start making these.
Ronald C Dudelston
2024-12-03 16:15:59
Two of the templates had bumps where the plastic wasn’t smoothly cut. Not a huge deal because the bumps could be sanded off but far from perfect.
Recommended Products
$69.99
$ 31 .99 $31.99