Your cart is empty.
Your cart is empty.RP32104 cartridge replacement fits Monitor 1700 series dual-function(temperature and volume adjustment) shower(1998-2005). NOT to fix single-function Monitor 13/14 series faucet. RP32104(White cap, for showers 1998-2005) vs. RP46463(Grey cap, for showers after 2006). Components to adapt Monitor 1500 series shower are included. Manufactured by iyax.
Mark Mudry
2025-09-05 10:56:26
This cartridge was pretty much identical to the original equipment part. It was easily installed and performed as expected.
Matthew A.
2025-09-03 10:51:17
Worked as designed easy to install
DAWEI HUANG
2025-08-29 18:54:41
My old one kept dripping water. This one perfectly fits and works. No more dripping. I hope it will work long time.
mike
2025-08-15 11:38:52
So far so good
Mark B.
2025-08-11 15:23:38
It came with no instructions or parts list of any kind. So you better know what you’re doing if you’re doing this yourself. I watched the how to videos on Delta’s website and I apparently missed the video for the disassembly for my model. So when I thought I was removing the “bonnet†was actually just a slip on collar. So I was puzzled by how the handle was supposed to come off. Well with my strap wrench on the slip-on cover thinking I was removing the bonnet and the next thing I know is the handle is on the shower floor. Didn’t think much of it at the time. So now I remove the inner springs and washers. Replaced the other washers and went back to reassemble the faucet. That’s when I noticed that it couldn’t go back on because I ended up shearing the plastic spline. So after knocking out the broken spline I was able to fix the leak. Appearance really doesn’t matter because you don’t see the parts. Great value for the money and I believe that it’s as durable as the original one. Tip if your model is like mine try wiggling it off pulling straight out. I had so much soap scum I didn’t see how it was supposed to come off. I got too focused on the “bonnet†and be careful when turning bonnet nut because it’s usually brass and is easy to bend out of shape like using channel locks or pipe wrench.
MsMarge
2025-07-14 19:26:18
This part was exactly what we needed. Part number easy to look up. Watched online replacement instructions. Works perfectly. No more leaks...Saved us $500. on purchasing a new tub spigot...
David d.
2025-07-13 13:37:58
We had two of these Delta showers installed when we performed a major renovation soon after we bought this house about 23 years ago, but the one in the master started to leak recently. After an initial inspection by a so-called plumber who didn't have a clue, I found a real plumber, and a replacement cartridge on Amazon that appeared to fit the bill. There are actually two very similar items, but I figured ours was the pre-2006 model, so ordered it. Fortunately, it fit, after a lot of complaining by the plumber (corrosion had pretty much welded the old one in place) and we now have a working shower in the master again. Whew!
HEMI707
2025-07-10 15:26:25
Product came in a bag (not original Delta packaging) with all the needed parts and O-ring seals. Installation was fairly simple after watching a online YouTube video on how its done. Took pictures of disassembly of old cartridge so reassembly would be accurate. Old original cartridge had the HOT SIDE label on the top side when I pulled it apart. Upon reassembly I installed the new unit with HOT SIDE on the top. After installation was done and I turned water back on and unfortunately the hot and cold was backwards. Had to tear it all apart and turn the cartridge upside down so the HOT SIDE label was on the bottom. Picture attached shows the old original label on the top. That said I am not sure if this was a QA problem where they printed the label on the wrong side. Or because these are after market parts that's just the way it is. Just wanted to let everyone know about my experience. Once I flipped the cartridge around HOT and COLD valve functuonality was correct. Other than that parts fit exactly as OEM delta part an I had no more leaky tub faucet.
Gabbadens
2025-07-07 12:01:00
Perfect work great easy install no more leak
paul b.
2025-05-14 13:30:32
Works great
David Gingras
2025-05-13 14:01:40
Really easy toi install, good product, delivery on Time
Frank Tan
2025-01-19 12:33:30
I do like this new one. The problem was that the old plastic gear was worn out and it didn’t keep holding together with another metal part.
Richard Blackburn
2024-12-27 20:16:30
Vers simple for installation
Recommended Products
